Abstract:During the past earthquakes, different low ductile failure modes are observed in the gravity design structures and thus, the most of existing damage indices may fail to assess the damage of gravity design structures accurately in referring to the two main performance levels: immediate occupancy and ultimate limit state. Therefore, this study investigates the energy dissipated by the brittle structures and the possible damage indices based on energy for the damage assessment of gravity design frames. In the framework of an Energy-Based Seismic Design Approach, we need the assessment of the Demand and on the Capacity, both expressed in Energy. A methodology for the assessment of the seismic energy demands imposed on structures is already proposed, but not such methodology that makes consensus is proposed for the calculation of the Energy dissipation Capacity avoiding the Hysteretic models. The estimation of the energy expended by the building during an earthquake excitation is a tricky issue. For this purpose, this study considers the wavelet based energy estimation and compares it with different approaches for measuring the damages of a structure: the dominant inelastic period of a building and the more classical measure, the inter-story drift. IDA analysis are performed in energy, drift and inelastic period. Furthermore, the damage assessment results based on the expended energy for three gravity design buildings are compared and discussed relatively to the results expressed in inelastic period and drift. Finally, this study concludes that no significant effects of number of inelastic cycles to the damage assessment results for low ductile structures. However, this study also highlights the effects of number of inelastic cycles to the damage for medium and high ductile structures.

Study on the Seismic Design Method of Shear Structures Based on Damage

Study on the Method of Structural Seismic Performance Evaluation Based on the Damage Spectra

Seismic Design Methodology Based on Damage Mechanism Control for Reinforced Concrete Structures

SDOF System Damage Spectra and Their Application

Seismic design of rectangular/square columns in SDOF systems based on their damage performance

Seismic performance design of energy-dissipated structure system based on damage control and time-varying damping ratio

Inelastic Displacement Ratios for Design of Structures with Constant Damage Performance

Assessment of Seismic Structural Damage

A Comparative Test Study on the Seismic Damage Sustained by Frame-Core Tube Structures

Seismic Optimization Design for Uniform Damage of Reinforced Concrete Moment-Resisting Frames Using Consecutive Modal Pushover Analysis

DECISION-MAKING METHOD OF OPTIMAL FORTIFICATION LEVEL FOR ASEISMIC STRUCTURES BASED ON DAMAGE PERFORMANCE

Study on Displacement-Based Design Method for Energy Dissipation Structures

Seismic analysis of super high-rise structures based on plastic damage

Reliability-based damage performance design of structures

Damage demands evaluation of reinforced concrete frame structure subjected to near-fault seismic sequences

Distribution mode of hysteretic energy and damage mechanism of RC frame-shear-wall structure under strong earthquakes

Performance-based-plastic-design of damage-control steel MRFs equipped with self-centring energy dissipation bays

Seismic damage performance design of reinforced concrete structures based on improved capacity spectrum method

Study on energy-based application on steel seismic design method and braced frame structures

Energy-based seismic design: Needs of energy damage index values for serviceability and ultimate limit states for gravity design buildings?

Influence Analysis of Damping on Constant- Ductility Seismic Resistance Spectra for Seismic Design of Structures