Abstract:During the past earthquakes, different low ductile failure modes are observed in the gravity design structures and thus, the most of existing damage indices may fail to assess the damage of gravity design structures accurately in referring to the two main performance levels: immediate occupancy and ultimate limit state. Therefore, this study investigates the energy dissipated by the brittle structures and the possible damage indices based on energy for the damage assessment of gravity design frames. In the framework of an Energy-Based Seismic Design Approach, we need the assessment of the Demand and on the Capacity, both expressed in Energy. A methodology for the assessment of the seismic energy demands imposed on structures is already proposed, but not such methodology that makes consensus is proposed for the calculation of the Energy dissipation Capacity avoiding the Hysteretic models. The estimation of the energy expended by the building during an earthquake excitation is a tricky issue. For this purpose, this study considers the wavelet based energy estimation and compares it with different approaches for measuring the damages of a structure: the dominant inelastic period of a building and the more classical measure, the inter-story drift. IDA analysis are performed in energy, drift and inelastic period. Furthermore, the damage assessment results based on the expended energy for three gravity design buildings are compared and discussed relatively to the results expressed in inelastic period and drift. Finally, this study concludes that no significant effects of number of inelastic cycles to the damage assessment results for low ductile structures. However, this study also highlights the effects of number of inelastic cycles to the damage for medium and high ductile structures.

Assessment of Seismic Structural Damage

A New Approach for Studying Fatigue Damage

Seismic Analysis of Steel Structures Considering Damage Cumulation

Damage Assessment Using The Energy Dissipation Ratio Of Acceleration Signals

A Method for Evaluating Earthquake-Induced Structural Damage Based on Displacement and Hysteretic Energy

Study on the Method of Structural Seismic Performance Evaluation Based on the Damage Spectra

Energy-based seismic design: Needs of energy damage index values for serviceability and ultimate limit states for gravity design buildings?

Seismic damage criteria of structures with hysteretic dampers taking account of low-cycle fatigue characters

Post-earthquake structural damage assessment and damage state evaluation for RC structures with experimental validation

Seismic Damage Assessment of High-Rise Structures Based on Experimental Measurements

Seismic Damage Analysis of Reinforced Concrete Frame Using the Force Analogy Method

A plastic-damage hysteretic model to reproduce strength stiffness degradation

Development of a Simplified Damage Model for Beams Aiding Performance Based Seismic Design

Seismic damage estimation of in-plane regular steel moment resisting and x-braced frames

Deformation and energy-based seismic damage evaluation of reinforced concrete structures

Seismic Damage Estimation of In-Plane Regular Steel/concrete Composite Moment Resisting Frames

Energy-Based Damage Assessment Methodology for Structural Health Monitoring of Modern Reinforced Concrete Bridge Columns

Method for Probabilistic Evaluation of Seismic Structural Damage

Overall damage identification of flag-shaped hysteresis systems under seismic excitation

Damage assessment of unreinforced masonry buildings incorporating damage accumulation

SEISMIC DAMAGE ASSESSMENT OF HIGH-RISE RC STRUCTURES BASED ON MATERIAL DAMAGE MODEL