Abstract:International Journal of Structural Stability and Dynamics, Ahead of Print. Lightweight robotic arms are one of the main technologies to improve the working performance of robotic arms in the future. Focusing on the spatial vibrations issue brought about by the light-weighting of a space robotic arm in this paper, a rigid–flexible coupling dynamics model of a space robotic arm system was established based on the assumed mode method and Lagrange method. Based on the lightweight flexible robotic arm structure, a comparative analysis of the first four mode functions was conducted under different fixed constraints and physical properties to determine the mode order that matches the simulation analysis of this robotic arm, thus, further simplifying the rigid–flexible coupling dynamics equations of the system. The overall rigid model and simplified dynamic model of the robotic arm system were solved by using MATLAB, resulting in a motion trajectory of the flexible arm end in space. The three-dimensional model was validated and simulated using virtual prototype technology under the same joint inputs as the model in MATLAB. The simulation results demonstrated that the trajectory of the end of the flexible arm was basically the same between simplified dynamics model simulation and virtual prototype simulation, and the maximum deviation of the end trajectories of the flexible connecting rods [math] and [math] was less than 18[math]mm and 58[math]mm, respectively. Meanwhile, the trajectory trend of the end of the flexible arm in the two aforementioned models was the same as the simulation results of the ideal model (overall rigid model). The above conclusions can verify the correctness of the mathematical model of dynamics obtained from the calculations in this paper. In addition, the research data showed that the maximum vibration deviation of the flexible arm was stabilized within a certain value range under different joint inputs, and this research also provided theoretical support for the late vibration suppression control of the spatial rigid–flexible coupled robotic arm.

On static stiffness modeling of 6R lightweight joint robot

Measurement and Analysis of End Jitter of Six-Axis Industrial Robots.

Stiffness-oriented Posture Optimization in Robotic Machining Applications

End Stiffness Modeling for Automatic Horizontal Dual-Machine Cooperative Drilling and Riveting System

Stiffness-oriented Performance Indices Defined on Two-Dimensional Manifold for 6-DOF Industrial Robot

A Modeling and Calibration Method of Heavy-Duty Automated Fiber Placement Robot Considering Compliance and Joint-Dependent Errors

Design and Experiments of a Robotic Arm with a Rigid-Soft Coupling Structure

Study on the Static Stiffness of the Parallel Flexure Joint Robot

Static Stiffness of Three-Axis Actuators Based Posture Alignment System for Large Aircraft Components

Optimization of stiffness performance of six-axis industrial robots based on posture stiffness evaluation index

Structure Optimization Design of Robot Arm Based on Flexible Multi-body Dynamics

Research on the Stiffness Performance for Robot Machining Systems

Kinematics Analysis and Simulation of QJ-6R Welding Robot Based on Matlab

Robotica: decoupled elastostatic stiffness modeling of hybrid robots

Static Stiffness Modeling and Experiments of Polishing Manipulator Arm

Dynamic Modeling and Optimization Analysis of Rigid–Flexible Coupling Manipulator Based on Assumed Mode Method

Variable Stiffness Identification and Configuration Optimization of Industrial Robots for Machining Tasks

A Study on the Stiffness of the End of the Suspended Master–slave Remote Control Manipulator

Stiffness modeling of n(3RRlS) reconfigurable series-parallel manipulators by combining virtual joint method and matrix structural analysis

Modeling and Compensation of Motion Errors for 6-DOF Robotic Manipulators

Nonlinear Effects in Stiffness Modeling of Robotic Manipulators