Abstract:Contact force estimation makes the interaction between the robot and the environment perceptible and controllable without the need for additional sensor devices. For robots used in Automated Fiber Placement (AFP), contact force estimation is primarily aimed at grasping the magnitude and real-time variations of the compaction roller force, which is one of the most critical process parameters in AFP, directly related to layup accuracy and quality. However, contact force estimation during AFP faces challenges: the consumable carbon fiber prepreg material is mounted on the end-effector, leading to continuous changes in load dynamics parameters. Ignoring this situation renders contact force estimation unreliable, making real-time end-load calibration necessary. This paper first establishes a linear dynamic model of the robot and obtains the Variable Parameter Set (VPS) related to end-load. Then, combining distance sensors and weighted moving average, the volume changes in material rollers are measured to perform fast load calibration of the end-effector and update the VPS. Subsequently, a joint hybrid friction model is established and calibrated. Based on this, a Disturbance Kalman Filter (DKF) observer is established using inverse dynamics and discrete Kalman filter algorithms for real-time estimation of contact force. The calibration routine of the DKF observer considers the noise in measured motor currents and errors in velocity data from individual joints. Vertical lifting experiments and actual AFP experiments demonstrate that fast load calibration and DKF observer can provide robust and accurate estimation of end-effector contact force. Compared to force sensors and the DKF observer without FLC, the RMSE is reduced by over 49 %.

Measurement and Analysis of End Jitter of Six-Axis Industrial Robots.

Measurement and Application of Industrial Robot Jitter

An Enhanced POE-Based Method with Identified Transmission Errors for Serial Robotic Kinematic Calibration.

Calibration of 6-DOF Parallel Mechanism Using Joint Force Sensors

An Improved Kinematic Model for Serial Robot Calibration Based on Local POE Formula Using Position Measurement

Early Chatter Identification of Robotic Boring Process Using Measured Force of Dynamometer

End-effector Contact Force Estimation for the Industrial Robot in Automated Fiber Placement Processes with Dynamic End-Load Variations

Pose Error Compensation Based on Joint Space Division for 6-DOF Robot Manipulators

On static stiffness modeling of 6R lightweight joint robot

Sensitivity Analysis of Performance Tests for Six-Degree-of-Freedom Serial Industrial Robots

Optimization of stiffness performance of six-axis industrial robots based on posture stiffness evaluation index

Vibration Measurements on a Six-Axis Collaborative Robotic Arm—Part I

The Device for Calibration Based on the Six-freedom of Generalized Force

Design of a High-torque Robot Joint and Its Control System

Joint Torque and Ground Reaction Force Estimation for a One-Legged Hopping Robot.

A Strong Real Time Algorithm For Inverse Kinematics Of 6r Robots

Dynamic behavior analysis for a six axis industrial machining robot

Calibration Of A 6-Dof Industrial Robot Considering The Actual Mechanical Structures And Cnc System

Joint stiffness identification of industrial serial robots using 3D digital image correlation techniques

An Integrated Compensation Method for the Force Disturbance of a Six-Axis Force Sensor in Complex Manufacturing Scenarios

Vibration characterization of a planar multi-degree-of-freedom industrial machine