Abstract:The cutting temperature is a key factor which directly affects cutting tool wear, workpiece surface integrity and machining precision in the high speed machining (HSM) process. The purpose of this paper is to present an inverse heat-transfer model considering three-dimensional transient heat conduction to calculate the heat flux and the temperature distribution on the tool–workpiece interface in the high speed milling process. The model was set up by a finite element method based on Beck’s inverse heat-conduction theory and was verified by numerical simulations and a series of experiments which aimed to obtain the surface temperature data of a thin-walled workpiece with the aid of an infrared thermometer and the tool–workpiece interface temperature by an embedded artificial thermocouple. The dynamic characteristics of the cutting temperature in high-speed milling aluminum alloy were studied systematically. The numerical simulation results revealed that there was a close agreement between the calculated temperature value and the measured temperature value of the cutting interface in high-speed milling of aluminum alloy. The inverse heat-conduction method can be used to estimate the heat flux flowing into the workpiece and the temperature distribution on the tool–workpiece interface. Using the infrared thermometer as a remote sensor can solve the problem of measuring the temperature in high-speed milling and also it can be used as an approach to reveal the cutting mechanism of high-speed milling. There exists a critical cutting speed in the high-speed milling aluminum alloy. The value of this critical speed will be different for the different cutting conditions. Constant feed per tooth must be kept in high-speed milling to efficiently suppress excessive heat generation while obtaining a high material removal rate, especially for machining difficult to-cut materials with a thin-wall construction. The average tool–workpiece interface temperature is influenced by the thickness of the workpiece. The related temperature distributions will be very beneficial to the optimal construction design for the thin-wall parts used in the aeronautics and astronautics as well as die and mold industries.

CUTTING TEMPERATURE MEASUREMENT IN HIGH-SPEED END MILLING

Dynamical Temperature Monitoring System Design for High-speed Cutting Based on Thin-film Thermocouples

Cutting Temperature and Force Data Acquisition and Measuring System Design in High Speed Machining

The Assessment of Cutting Temperature Measurements in High-Speed Machining

Study On Cutting Temperature Measurement In High Speed Machining

Research on Dynamic Artificial Thermocouple Method

A High-speed Cutting Temperature Measurement Equipment Based on Semi-manual Thermocouple Method

Experimental Studies of Cutting Temperature During High-Speed Milling of Aerospace Aluminum

Research on 3D Numerical Simulation and Experiment of Cutting Temperature for High Speed Milling of Aerospace Aluminum Alloy

Non-Contact Temperature Measurement by Infrared Pyrometer in High Speed Milling

The Present Status of Measuring Technique of Temperature Field During High Speed Machining

Experimental research on the dynamic characteristics of the cutting temperature in the process of high-speed milling

Two-channel Thermocouple Acquisition System and Application in the Measurement of Cutting Temperature

A Locally Boron-Doped Diamond Tool for Self-Sensing of Cutting Temperature: Lower Thermal Capacity and Broader Applications

Thermocouple and Infrared Sensor-Based Measurement of Temperature Distribution in Metal Cutting

Temperature Signal Gathering and Analysis for High Speed Milling High Manganese Steel

A Real-Time Cutting Temperature Monitoring of Tool in Peripheral Milling Based on Wireless Transmission

Temperature measurement in single point turning

Cutting temperature measurement in turning using fiber-optic multi-spectral radiation thermometry and its application in tool wear status recognition

Temperature measurement performance of thin-film thermocouple cutting tool in turning titanium alloy

Experimental investigation of cutting tool temperature during slot milling of AerMet 100 steel