CAD software development of prestressed lattice structure

Jian-chun XIAO,Ke-jian MA,Shi-ling DONG

2001-01-01

Abstract:This paper introduces the main specialities, basic functions, and technological methods of software PLAS-CAD (Prestressed Lattice Structure CAD).

What problem does this paper attempt to address?

Calculation of prestress distribution for large-span cable-strut tensile structures

Lin Jun,Dong Shilin,Wang Yinda,Gao Jiling

DOI: https://doi.org/10.3321/j.issn:1000-131X.2006.05.003

2006-01-01

Abstract:Based on the study of a new type of large-span structure, i.e. a spatial cable-truss tensile structure with an annular plane and complex geometric topology, a new method of prestress optimization using object-selection optimization was proposed. The main objective of the aforementioned method is to solve the complicated problem of feasible prestress distribution in cable-strut tensile structures with multi states of self-equilibrium stress and modes of mechanism displacement. In the proposed method, the modal matrix technique of decomposition and assembly operation, theory of structural equilibrium matrix and algebraic singular value decomposition method were employed. The method has a simple calculation format and can accomplish different objectives of structural prestress optimization. Three different ways in calculating the feasible prestress distribution in cable-strut tensile structures were summarized, and numerical results for three different types of structural systems were obtained to demonstrate the simplicity and validity of the proposed method.
Development of Static and Dynamic Test of Steel Beam Reinforced by External Prestressed Force

Chengbin LIU,Jianqun JIANG,Shice YU,Zhihua HU,Xiaohua JI

DOI: https://doi.org/10.3969/j.issn.1672-4550.2019.01.008

2019-01-01

Abstract:In order to make up for the shortcomings of the structural test course project, combined with the civil engineering independent innovation test course construction, an external prestressed beam experimental device for static and dynamic testing was designed and fabricated.Investigate the influence of the prestress value of the cable on the static and dynamic characteristics of the structure itself.The teaching effect shows that the experimental research to achieve knowledge internalization and migration is an important way to cultivate students' practical and innovative abilities.
SIMPLIFIED CALCULATION METHOD AND EXPERIMENTAL RESEARCH ON PRESTRESSED FOLDED-PLANE RETICULATED SHELL

Dong XING,Jingyu HE,Changjiang LIU,Shilin DONG

DOI: https://doi.org/10.13204/j.gyjz201806024

2018-01-01

Abstract:The single-layer folded-plane reticulated shell which is proposed recently is a kind of single-layer reticulated structure composed of triangular lattices, looking like an assemblage of diamonds.In order to optimize the mechanical properties of the lattice shell structure, several ring cables could be add up to the basic structure system. A simplified structural behavior calculation method for prestressed system was drawn, by which the internal force solution of the structure in different prestress cases could be easily obtained.According to the static loading experiment results, the theoretical solution was in a good agreement with the experiment results.
Configuration, classification and static behavior of cable-supported lattice intersected cylindrical shells

Ming-liang ZHU,Shi-lin DONG

DOI: https://doi.org/10.13849/j.issn.1006-6578.2012.02.002

2012-01-01

Abstract:The latticed intersected cylindrical shell(LICS),which has individual architectural shapes and mechanical properties,is derived from the intersection of a certain number of cylindrical latticed shells.The path of conducting force is simple,finally comes together at the ridge or valley.So more requirements are proposed on the boundary constraint,which restricts the application and development of the LICS.This paper introduces a new type of spatial structure named cable-supported LICS and provides three methods of classification.The types of cable-supported LICS are summarized comprehensively,and an assumption is put forward that a large area of structure could be combined by cable-supported LICS.A dodecagon valley-style suspen-LICS and its parameters are studied.By comparison with LICS without prestress,it is proved that the static behavior of cable-supported LICS is improved.
Research and Development of CAD Software of Steel Casting Technology and Pattern Assembly

Shu-yong DONG,Xi-jun ZHANG,Bai-cheng LIU

DOI: https://doi.org/10.3969/j.issn.1000-8365.2001.01.012

2001-01-01

Abstract:The computer-aided design of steel casting technology and its pattern assembly was studies in this paper. The developed software is a 2-D CAD software which w as developed with PC computer on AutoCAD and in the environment of Visual C++ an d ObjectARX.
STUDY ON APPLICATION OF CONCRETE FILLED PRESTRESSING STEEL TUBULAR STRUCTURE

庄一舟,吴建华,谢醒悔

DOI: https://doi.org/10.3969/j.issn.1000-4726.2001.12.002

2001-01-01

Abstract:Fully making use of unique advantages of concrete filled steel tubular/steel structure,concrete filled prestressing steel tubular compound structure is especially suitable for long span,heavy loaded,extremely adverse conditioned and complex shaped structure systems.Intensive study on this sort of structure would be helpful to promote the development thereof,simplify construction process and decrease construction cost.
The Application and Development of Pretensioned Long-Span Steel Space Structures in China

SL Dong,Y Zhao

DOI: https://doi.org/10.1016/b978-008044017-0/50005-6

2002-01-01

Abstract:Pretensioned long-span steel space structures are a new type of hybrid structures resulting from combining modem prestressing technology with long-span structures such as space grid structures (including space trusses and lattice shells), cable-bar tensioned structures and spatial truss structures. These structures have been developed rapidly and have found many applications in China in the recent decade. This paper provides a review of applications and developments of pretensioned long-span steel structures in China. The following topics on new technologies and new structures are given emphasis: prestressed grid structures, cable-stayed grid structures, beam string structures and prestressed segmental steel trusses. Prospects for pretensioned steel space structures in the 21st century are presented at the end of the paper.
Prestress design of spatial cable-truss tensile structures with annular plane

Jun LIN,Shi-lin DONG,Xing-fei YUAN

DOI: https://doi.org/10.3785/j.issn.1008-973X.2006.01.016

2006-01-01

Abstract:The new type of structural system-sunflower-patterned large-span spatial cable-truss tensile structure with annular plane presented here has advantage over rib-patterned large-span cable-truss structures under asymmetrical distributed loading. Considering its complex geometric topology, multi states of self-equilibrium stress and modes of inextensional mechanisms, a prestress optimization strategy was proposed to solve the final feasible prestress distribution problem of the structures with multi states of self-equilibrium stress, where the decomposition and assembly method of modal matrix, the theory of structural equilibrium matrix and the singular value decomposition method were utilized. Design of feasible prestress distribution on three different types of cable-truss structures was investigated. The numerical results show that the new structural system has excellent mechanical property, and that the proposed prestress optimization strategy has simple algorithm and general purpose.
A NEW METHOD FOR MULTI-STEP PRETENSIONING ANALYSIS OF PRESTRESSED SPACE GRID STRUCTURES

DONG Shi-lin,YUAN Xing-fei

2013-01-01

Abstract:Prestressed space grid structure is a new type of space structures combining the modern prestressing technology with long-span space structures. A new method for multi-step pretensioning analysis of prestressed space grid structures is presented in this paper. Based on the method of structural mechanics and the principle of linear superposition, the standard equations of unknown prestressing forces of prestressed members during each prestensioning step can be established and solved. The governing internal forces of prestressed members, the internal forces of unprestressed members as well as the nodal displacements can then be obtained easily. Prestensioning members according to the obtained governing forces, the designed prestressing forces of prestressed members will be reached automatically. An orthogonal square space structure pretensioned by five-step is analyzed. The numerical results show that the proposed method is correct, reliable and effective and can be applied into linear analysis of prestressed space grid structures and other pretension systems.
Form-finding and static wind load analysis of the complex tensioned cable membrane structure for the Expo Axis in Shanghai

XIANG Xin-An,DONG Shi-Lin,ZHAO Yang,TIAN Wei

DOI: https://doi.org/10.13849/j.issn.1006-6578.2013.02.013

2013-01-01

Abstract:The multi-step form-finding method of complex tensioned cable membrane structures is proposed.In this method,the complex tensioned cable membrane structures are decomposed into the membrane surface sub-structure,flexible supporting sub-structure and rigid supporting sub-structure.The form-finding analysis of the membrane surface sub-structure and flexible supporting sub-structure are studied separately,and then all sub-structures are composed and form-found.This method simplifies the form-finding analysis of complex tensioned cable membrane structures and is conductive to get the ideal form-finding result.Using this method,through 10 steps,the form-finding analysis of tensioned cable membrane structure of the Expo Axis is studied by Easy which is a professional tensioned cable-membrane structures analysis software.The wind load application program is given which generates the wind pressure contour areas for EASY model from the measuring point data of the wind tunnel experiment,making the application of the wind load fast and accurate.The results are processed by the interface program which exports EASY result files to AutoCAD DXF files,and it is found out that the structure responses most intensely under the wind blown from the 45°,90°,225°and 270° directions.
Application and analysis of cables in light structures

Yaozhi Luo,Xian Xu,W. Ge

DOI: https://doi.org/10.1061/41096(366)332

2010-01-01

Abstract:This paper presents a brief introduction on recent application of cables in light structures. Prestressibility is a common characteristic of the cables in various light structures. Some structures need prestress to keep stability, such as tensegrity structures and cable domes. For these structures, a process of form-finding is needed to determine the geometrical configurations of them. The form-finding of cable structures is modeled as constrained optimization problems, and direct search methods are proposed to solve these problems. The structural response of cable structures is usually geometrically nonlinear, and sometime even mechanism displacements are involved. A general theory so-called nonlinear force method for analysis of the structural systems with mechanism displacements is proposed. Shape adjustment in the construction of cable structures or in the control of adoptable cable structures are investigated. Optimization models and numerical algorithms are proposed to optimize the control process. © 2010 ASCE.
Simulation of cantilever-casting construction of prestressed concrete cable-stayed bridge

Wang Jinfeng,Xiang Yiqiang,Xu Xing

DOI: https://doi.org/10.3321/j.issn:1671-4512.2008.04.031

2008-01-01

Abstract:According to structure feature of modern prestressed concrete(P.C.) cable-stayed bridge and its stress characteristics,degenerated solid element was adopted to build 3D models of cantilever casting analysis for P.C.cable-stayed bridge.The prestressed reinforcement was taken as a part of structure,and the prestressing effect was simulated by equivalent node loads.The concrete creep effect was computed by a three-parameter viscoelastic model. The formula to calculate the action of concrete casting was deduced on the basis of the deformation compatibility condition of trailing cable′s anchorage.One P.C.cable-stayed bridge as an example was studied in application.The results show that the method is better than the classic two-dimensional method.It can give a correct prediction of cable tensions,and provide a sound basis for construction control and checking.
Design of lattice structure for additive manufacturing in CAD environment

Dinh Son NGUYEN

DOI: https://doi.org/10.1299/jamdsm.2019jamdsm0057

2019-01-01

Abstract:Additive manufacturing is an advanced manufacturing technology that allows building any complex 3D geometry of product by adding layer by layer of material. One of the most important effectiveness of additive manufacturing is able to manufacture lattice structure inside product space in order to reduce the usage of material and the weight of the product but still ensure its mechanical properties. The lattice structure is a network of bars linked each other in a space of product and it can be quickly manufactured due to the development of additive manufacturing technologies. However, the design of a model of the lattice structure in the computer-aided design environment has many difficulties. The current modeling technologies do not support product designer to automatically create a model of the lattice structure with the different type of configurations. Therefore, the paper will present new approaches to automatically generate a 3D model of the lattice structure in the design space of the product. These approaches allow creating different configurations of the periodic or non-periodic lattice structure.
Development of CAD/CAM System for Progressive Die of Lead Frame Based on SolidWorks

吴央芳,李江雄,张峻,杨洁,柯映林

DOI: https://doi.org/10.3321/j.issn:1003-8728.2003.04.047

2003-01-01

Abstract:According to structure of lead frame, an idea f or developing a CAD system for progressive die based on Solidworks is presented. Product drawing input, technic plan, part database, die construction design and NC programming modules of the system are introduced. The structure of the syste m and the methods adopted in the modules are discussed. An application shows tha t our system is more efficient.
Research and Application of Foundry CAD/CAE System

朱昌盛,安国升,王智平,刘致远

DOI: https://doi.org/10.3969/j.issn.1003-5311.2009.08.027

2009-01-01

Abstract:In this paper,the three-dimensional model contained foundry technical information is created by Pro/E software,and then the numerical simulation of solidification process is carried out based on MAGMAsoft,so that the verification and optimization of technical design can be achieved. According to the simulation results,the reasons of casting defects can be found,and by modifying the processing parameters,the process can be optimized and improved. Finally,a reasonable technology program can be brought forward.
Spatial Simulating Analysis Of Prestressing Force Effect Of Long Span Prestressed Concrete Box Girder Bridge

Jf Wang,Yq Xiang

2004-01-01

Abstract:The prestressing load is one of the key loads in P. C. bridge under normal service stage. In modern P. C. bridges, besides the longitudinal prestressing forces, the transversal and vertical prestressing forces are often used. The spatial stresses effect caused by prestressing force is very evident and the behaviour of structure is complicated in the P. C. bridges. The traditional elementary beam theory can not analyze the spatial stresses effect. Based on the conventional 3D isoparametric finite element method, one new, more convenient and effective element-degenerated solid element for analyzing all kinds of complicated structures is presented. It assemble the advantages of the shell element and 3D isoparametric element. In the end, a typical three-span P. C. continuous rigid-frame box girder bridge is analyzed by the method. Influence of prestressing force on spatial effect is explored. The analysis results indicate that the degenerate solid element is a effective and practical method.
Spatial behavior and strengthening analysis of fabricated PC hollow slab beam bridge with hinge joints

Yiqiang Xiang,Cheng Xing,Linhai Shao,Yuan Xing,Chunfeng Chao

DOI: https://doi.org/10.3969/j.issn.1001-0505.2012.04.030

2012-01-01

Abstract:To ascertain the crack mechanism along the hinge joints of fabricated PC (prestressed concrete) hollow slab beam bridges and the strengthening method, a typical fabricated hollow slab beam bridge was taken as an example and an accurate three-dimensional finite element model was built by simulating the whole bridge using entity unit. The stresses in the control sections of the bridge were analysed to conclude that the main cause of longitudinal cracks along the hinge joints was the excess of transverse stress. Based on above analysis results, two schemes including adding transverse prestress steel wire system to strengthen and improve the transverse load bearing capacity of such kind of bridges were presented, and numerical analyses and comparison of the two strengthening schemes were conducted. The results show that both strengthening schemes can effectively reduce the transverse tensile stresses in the hinge joints of hollow slab beam bridges and greatly improve the integrity of the bridge. The scheme with the prestressed steel wire set in the area 25 cm from the bottom of the beam is more effective and has more advantages in durability and security.
The Special Software Development of Combination Plumbing of Pressure Pipes in AutoCAD Using VB6.0

Tao XIE,Zhi-jiang JIN,Xiang-yu ZHENG,Fei WAMG,Su-juan ZHANG

DOI: https://doi.org/10.3969/j.issn.1001-3997.2006.10.029

2006-01-01

Abstract:The conception and the superiority of combination plumbing of pressure pipes are introduced.Regarded VB6.0 as development environment.,the second development of the special software for combination plumbing of pressure pipes that applies the connect provided by ActiveX Automation is introduced importantly.The technological process and key steps are expounded,and the partial codes and example are given also.The result in application using this special software is favourable.
Data Computing Model and Software Development for Construction Setting-out of Line Curve

Mingduan Zhou,Bohong Ma,Miao Wang,Wenyao Zhang,Binbin Wang

DOI: https://doi.org/10.1088/1742-6596/1624/2/022012

2020-10-01

Journal of Physics: Conference Series

Abstract:Abstract In view of the fact that the line design is often a cross combination of multi-curves, it is difficult to meet the middle-pile surveying data computing of multi-curves combination for the existing tool software. In this paper, a line pile-point surveying data computing software (LPLS) suitable for multi-curves combination is designed and developed, and the flowchart of software design and development is given. Through the computing and analysis of engineering examples, the main functional modules of LPLS software are verified, and the correct and reliable computing results are obtained.
Stress field guided lattice structure design based on hexahedral mesh

Lingyun Liu,Yizhou Liao,Shuming Gao

DOI: https://doi.org/10.1115/detc2019-97248

2020-01-01

Abstract:Lattice structures are promising for a wide range of applications. The development of additive manufacturing (AM) technology has made it possible to manufacture complex structures. However, designing the optimal lattices of complex solid models efficiently and automatically remains a challenge. Thus, we propose a novel stress-field-guided lattice design method to improve the mechanical properties of a lattice structure. Stress field is used to make the boundary struts of each cell of a lattice structure aligning to the principal stress direction while remaining conformal. Hierarchical cell templates are designed to reduce the computational burden of the cell optimization of a lattice structure. The proposed method is verified experimentally, and the experimental results prove the efficiency and validity of the proposed method.

CAD software development of prestressed lattice structure

Calculation of prestress distribution for large-span cable-strut tensile structures

Development of Static and Dynamic Test of Steel Beam Reinforced by External Prestressed Force

SIMPLIFIED CALCULATION METHOD AND EXPERIMENTAL RESEARCH ON PRESTRESSED FOLDED-PLANE RETICULATED SHELL

Configuration, classification and static behavior of cable-supported lattice intersected cylindrical shells

Research and Development of CAD Software of Steel Casting Technology and Pattern Assembly

STUDY ON APPLICATION OF CONCRETE FILLED PRESTRESSING STEEL TUBULAR STRUCTURE

The Application and Development of Pretensioned Long-Span Steel Space Structures in China

Prestress design of spatial cable-truss tensile structures with annular plane

A NEW METHOD FOR MULTI-STEP PRETENSIONING ANALYSIS OF PRESTRESSED SPACE GRID STRUCTURES

Form-finding and static wind load analysis of the complex tensioned cable membrane structure for the Expo Axis in Shanghai

Application and analysis of cables in light structures

Simulation of cantilever-casting construction of prestressed concrete cable-stayed bridge

Design of lattice structure for additive manufacturing in CAD environment

Development of CAD/CAM System for Progressive Die of Lead Frame Based on SolidWorks

Research and Application of Foundry CAD/CAE System

Spatial Simulating Analysis Of Prestressing Force Effect Of Long Span Prestressed Concrete Box Girder Bridge

Spatial behavior and strengthening analysis of fabricated PC hollow slab beam bridge with hinge joints

The Special Software Development of Combination Plumbing of Pressure Pipes in AutoCAD Using VB6.0

Data Computing Model and Software Development for Construction Setting-out of Line Curve

Stress field guided lattice structure design based on hexahedral mesh