Abstract:A comprehensive modeling framework for the thermoforming of polymer matrix woven laminate composite was developed. Two numerical indicators, the slip path length and traction magnitude, have been identified to be positively correlated to matrix smearing and wrinkling defects. The material model has been calibrated with picture-frame experimental results, and the prediction accuracy for intra-ply shear and thickness distribution was examined with measurements of the physically formed parts. Specifically, thickness prediction for most locations on the formed parts was accurate within an 11.6% error margin. However, at two points with significant intra-ply shear, the prediction errors increased to around 20%. Finally, a parametric study was conducted to determine the relationship between various process parameters and the quality of the formed part. For the trapezoidal part, orienting the laminate at 45 degrees to the mold axis reduces the likelihood of matrix smear and wrinkling defects. Although this laminate orientation yielded a greater spatial variation in part thickness, the thickness deviation is lower than that for the 0-degree orientation case. Two forming analyses were conducted with ramp rates of 25 mm/s and 80 mm/s to match the equipment's operational limits. It was observed that higher forming rates led to a greater likelihood of defects, as evidenced by a 15% and 10% increase in the formed part areas with longer slip paths and higher traction magnitudes, respectively. It was discovered that shallower molds benefit from faster ramp rates, while deeper molds require slower rates to manage extensive shearing, stretching and bending. Faster forming rates lead to smaller thickness increases at high intra-ply shear regions, indicating a shift from intra-ply shear to out-of-plane bending due to the visco-plastic effect of the molten laminate and can negatively impact part quality. Lastly, it was shown that a well-conceived strategy using darts could improve the part quality by reducing the magnitude of the defect indicators.

A lamination model for thermostamping of carbon woven fabric reinforced thermoplastic resin composites

A Lamination Model for Forming Simulation of Woven Fabric Reinforced Thermoplastic Prepregs

A hybrid lamination model for simulation of woven fabric reinforced thermoplastic composites solid-state thermo-stamping

Understanding the Impact of Fibre Wrinkle Architectures on Composite Laminates Through Tailored Gaps and Overlaps

A Mechanics Analysis of Carbon Fiber Plain-Woven Thermoset Prepreg During Forming Process Considering Temperature Effect

Multi-scale finite element simulation of the thermoforming of a woven fabric glass fiber/polyetherimide thermoplastic composite

An Anisotropic Visco-Hyperelastic Model for Thermally-Actuated Shape Memory Polymer-Based Woven Fabric-Reinforced Composites

A simulation method of forming wrinkle defects in thermoplastic woven fabric prepregs in a wide temperature range based on non-orthogonal constitutive model

Thermo-mechanical Modeling of Woven Fabric Reinforced Shape Memory Polymer Composites

Experiment Study of Thermoforming of Plain Woven Composite (Carbon/thermoplastics)

Experimental Investigation and Modeling of Dynamic Thermomechanical Behavior of 4-Harness Satin Weave Carbon/epoxy Composites

Forming of Thermoplastic Plain Woven Carbon Composites

An Anisotropic Hyperelastic Constitutive Model for Thermoplastic Woven Composite Prepregs

Experimental characterisation and constitutive modelling of the intra-ply tensile and shear properties of unidirectional fibre reinforced thermoplastics (UD FRTPs) under solid-state stamp forming conditions

A Modeling Framework for the Thermoforming of Carbon Fiber Reinforced Thermoplastic Composites

Temperature-Dependent modelling of tension, in-Plane shear, and bending behaviour in non-isothermal thermo-Stamping process simulation of unidirectional UHMWPE fibre reinforced thermoplastic TPU composites

Analyses of Wrinkling Mechanisms During Forming of Multi-Layer Woven Fabric Reinforced Thermoplastic Prepregs

A Comprehensive Review Of Characterization And Simulation Methods For Thermo-Stamping Of 2d Woven Fabric Reinforced Thermoplastics

An Approach In Modeling The Temperature Effect In Thermo-Stamping Of Woven Composites

Controllable Three-Dimensional Thermal Field for Enhancing Tensile Strength of Additive Manufactured Continuous Fiber Reinforced Composites: Modeling, Simulation, and Experiment

Process-dependent Multiscale Modeling for 3D Printing of Continuous Fiber-reinforced Composites