Abstract:Abstract The oil and gas, chemical, and process industries employ centrifugal compressors for a wide range of applications. Due to this, the conditions under which centrifugal compressors have to operate vary significantly from case to case. Gas pipeline compressors, for example, may feature discharge pressures well over 100 bar. In other fields of application, like gas injection, which is used to enhance oil recovery, this quantity can reach considerably higher values. Here, discharge pressures over 600 bar and gas densities over 300 kg/m3 are not uncommon. During the last several decades, comprehensive research was conducted on the impact of high-pressure operating conditions on the vibrational behavior of centrifugal compressor wheels. Nowadays, it is well-known that an increase in gas pressure levels leads to a more pronounced interaction between the side cavities and the impeller, which results in a frequency shift of the acoustic and structural modes. For the safe operation of compressors, it is necessary to predict these coupled natural frequencies accurately. The state-of-the-art approach to achieve this objective is the finite element method. While this technique provides high-quality results, the simulation of acousto-mechanical systems is still a time-consuming process that incurs high computational costs. Therefore, finite element models are, in this case, not suitable for probabilistic studies, sensitivity analyses, and comprehensive simulations of the full operating range of the compressor. In 2013, Magara proposed a simplified model based on an annular plate between two cylindrical cavities to solve this problem. While this method reduces the required computational effort significantly, its use is limited to platelike impellers. The authors of this paper propose a more generalized method to overcome the challenges mentioned earlier. It uses the uncoupled structural and acoustic modes of the actual impeller and side cavities in a modal superposition to approximate the natural frequencies of the coupled acousto-mechanical system. In this way, the intended design geometries of the impeller and side cavities are considered while maintaining the advantages of Magara's model regarding the computational effort. In a numerical study, Magara's method and the generalized model are applied to different systems of increasing complexity. The investigation starts with a simple annular plate in a cylindrical cavity and ends with an actual compressor impeller. At every complexity level, the results of both approaches are compared to a finite element analysis. Moreover, measurement data of a simplified rotor in a cylindrical cavity are used to validate the numerical models. Finally, this paper concludes with a discussion of the limitations and benefits of all employed numerical methods.

Load identification of impeller blades based on the Hermitian wavelet finite element method

Hermitian Mindlin Plate Wavelet Finite Element Method for Load Identification

Modified Hermitian cubic spline wavelet on interval finite element for wave propagation and load identification

Load Identification in One Dimensional Structure Based on Hybrid Finite Element Method

Hermitian plane wavelet finite element method: Wave propagation and load identification.

Computation of Stress Distribution in a Mixed Flow Pump Based on Fluid-Structure Interaction Analysis

Fatigue Analysis And Lifetime Estimation Of Centrifugal Compressor Impeller Blades

Random Vibration Analysis for Centrifugal Compressor Impellers with Unsteady Aerodynamic Excitations

Numerical Study on High Cycle Fatigue Failure of a Centrifugal Compressor Impeller Blades

Multidisciplinary Analysis Transient Flow Effects On The Impeller In A Semi-Open Centrifugal Impeller Stage

Based on Wavelet and Windowed Multi-Resolution Dynamic Mode Decomposition, Transient Axial Force Analysis of a Centrifugal Pump under Variable Operating Conditions

A new method to identify non-steady thermal load based on element differential method

On the elastic–plastic behaviors of centrifugal steam compressor impeller under cyclic thermomechanical loading

Generalized Model for the Approximation of Coupled Acousto-Mechanical Natural Frequencies in High-Pressure Centrifugal Compressors

A Wavelet Finite Element Method for the Analysis of Rotor-Bearing Systems

Free vibration analysis of composite laminated cylindrical shells using the Haar wavelet method

Numerical investigation of the self-induced unsteadiness phenomenon in the impeller of a high-loading centrifugal compressor

The harmonic balance method with arc-length continuation in blade-tip/casing contact problems

Identification of Crack in a Rotor System Based on Wavelet Finite Element Method

A numerical solution for vibration analysis of composite laminated conical, cylindrical shell and annular plate structures

Free vibration analysis of laminated composite and sandwich shells using wavelet finite element method