Abstract:The internal flow evolution of the pump was induced with impeller movement. In various conditions, the peak load on centrifugal blade under the change of rotational speed or flow rate was also changed. It would cause an error when inertia load with a safety coefficient (that was difficult to ascertain) was applied in structure design. In order to accurately analyze the impeller stress under various conditions and improve the reliability of pump, based on a mixed flow pump model, the stress distribution characteristic was analyzed under different flow rates and rotational speeds. Based on a three-dimensional calculation model including impeller, guide blade, inlet and outlet, the three-dimension incompressible turbulence flow in the centrifugal pump was simulated by using the standard k-epsilon turbulence model. Based on the sequentially coupled simulation approach, a three-dimensional finite element model of impeller was established, and the fluid-structure interaction method of the blade load transfer was discussed. The blades pressure from flow simulation, together with inertia force acting on the blade, was used as the blade loading on solid surface. The Finite Element Method (FEM) was used to calculate the stress distribution of the blade respectively under inertia load, or fluid load, or combined load. The results showed that the blade stress changed with flow rate and rotational speed. In all cases, the maximum stress on the blade appeared on the pressure side near the hub, and the maximum static stress increased with the decreasing of the flow rate and the increasing of rotational speed. There was a big difference on the static stress when inertia load, fluid load and combined loads was applied respectively. In order to more accurately calculate the stress distribution, the structure analysis should be conducted due to combined loads. The results could provide basis for the stress analysis and structure optimization of pump.

Study of flow field and vibration characteristics of supersonic centrifugal impellers based on fluid-structure interaction

Computational Fluid Dynamics Simulation of Hydrodynamics in an Uncovered Unbaffled Tank Agitated by Pitched Blade Turbines

CFD Simulation and PIV Measurement of the Flow Field Generated by Modified Pitched Blade Turbine Impellers

Optimization Design of Centrifugal Fan Impeller Based on Numerical Simulation.

Experimental and Computational Analysis of the Impeller Angle in a Flotation Cell by PIV and CFD

Numerical Simulation of Inner Flow Field in Centrifugal Impeller with Long, Middle and Short Blades

Optimization of a Centrifugal Impeller on Blade Thickness Distribution to Reduce Hydro-Induced Vibration

Static Aeroelasticity Analysis of a Rotor Blade Using a Gauss-Seidel Fluid-Structure Interaction Method

Numerical Simulation of Flow in Centrifugal Pump with Complex Impeller

Blade Redesign Based on Secondary Flow Suppression to Improve Energy Efficiency of a Centrifugal Pump

Impeller design criterion based on numerical simulation of stock pump flow field and its application

Computation of Stress Distribution in a Mixed Flow Pump Based on Fluid-Structure Interaction Analysis

The Flow Simulation and Experimental Study of Low-Specific-Speed High-Speed Complex Centrifugal Impellers

Analysis of the Influence of Blade's Machining Error on Aerodynamic Performance of Impeller Based on NUMECA

Three-dimensional inverse design and fluid flow numerical simulation for centrifugal impeller

Liquid/solid flow field in a centrifugal pump with different impeller blade types by PIV

Blade Thickness Redesign to Improve Efficiency and Decrease Unsteady Pressure Pulsation of a Low Specific Speed Centrifugal Pump

Numerical Studies on Application of Blended Blade and Endwall Technique on Transonic Centrifugal Compressor

Investigation on flow mechanism of an advanced transonic centrifugal compressor with free-form impeller at design and off-design speeds

Multi-objective Optimization Design of a Centrifugal Impeller Considering Both Aerodynamic Efficiency and Structural Machinability

Suppression of Secondary Flows in a Centrifugal Impeller by Optimisation Design