Abstract:Despite recent advances and improvements in modeling and prediction of the dynamics of the machining process, an efficient machining process is limited due to chatter and instability of machining system. In fact, the machining system contains various kinds of joints, which cause difficulties in dynamics modeling, simulation and prediction. Moreover, the flexible support system results in large deformation and violent vibration of the workpiece when machining, and the thin-walled workpiece easily gives rise to the chatter of the machining system. Therefore, the dynamics of the flexible support system was considered to calculate stability lobe diagram in the modeling of milling process. The whole machining system was regarded as a closed loop composed by the machine tool structures, support, workpiece and machining process. In this paper, the receptance coupling (RC) method was introduced to predict the dynamics of the closed machining system. A milling process was taken for example to predict the chatter limitations using the dynamics of closed model. The mathematical model of the machining system (machine tool structures, spindle, holder and tool), together with the details of joint contacts, was given based on the RC method. The RC model was used to obtain the dynamics of the system, while receptance of the tool point was coupled. Based on the coupling model of the machining system, the depth limitations under different speeds were estimated for the technology parameter optimization in milling process. The response was considered to be the sum of the cutting point and the support system. The flexibility of the support system was considered to be the feedback of the cutting stiffness. By this means, the traditional model was modified to calculate the stability lobe diagram based on the dynamics of the spindle and support system. Furthermore, the milling experiment was carried out to verify the prediction results, and the dominant natural frequencies of receptance at tool point were obtained by modal testing to define the stability lobe diagram. It was found that the chatter results matched well with the stability lobes. It was concluded that the support system with poor stiffness might cause violent chatter especially when the workpiece was thin-walled. The cutting depth limitations of the flexible support system were lower than that of the rigid one. Moreover, this closed model of the machining system is appropriate for the chatter prediction of the flexible support system or thin-walled workpiece, so it is helpful for a better parameter optimization.

Milling stability of high speed motorized spindles

Dynamic modeling and vibration response analysis of high speed motorized spindle

Analysis on the stiffness of angular contact ball bearings and its effect on the critical speed of a high speed motorized spindle

Thermo-mechanical coupling model and dynamical characteristics of machining spindle-bearing system

Modeling a Two-Span Rotor System Based on the Hamilton Principle and Rotor Dynamic Behavior Analysis

Thermal-mechanical dynamic interaction in high-speed motorized spindle considering nonlinear vibration

Coupling modeling of thermal–dynamics–milling process for spindle system considering nonlinear characteristics

Thermal-structure Characteristics Coupling Analysis and Optimisation for Horizontal CNC Machining Centre Spindle

Active Control of Milling Chatter Based on the Built-in Force Actuator

Milling Stability Prediction of a Hybrid Machine Tool Considering Low-Frequency Dynamic Characteristics

Stability analysis of high speed milling process considering internal damping of composite cutter bar and gyroscopic effect in rotating coordinates

Stability analysis for variable spindle speed milling via the 3rd-order Newton-Cotes method

Investigation of spindle-tool assembly dynamics for optical grinding motorized spindles

Analysis of the Dynamic Characteristics of the Ball Bearing-rotor System in High-speed Electric Spindles

Milling Stability Prediction for Flexible Workpiece Using Dynamics of Coupled Machining System

Stability Prediction of Milling Process with Closed Machining System Dynamics with Flexible Thin-Walled Workpiece

Nonlinear dynamic analysis of CNC lathe spindle-bearing system considering thermal effect

The Active Vibration Attenuation of A Built-In Motorized Milling Spindle

Modeling of the motorized spindle temperature field considering the thermos-mechanical coupling on constant pressure preloaded bearings

Investigation of Machining Stability Considering Thermal and Rotation Effect: Effectiveness of Impact Excitation for a Rotating Spindle

Development of a Digital Model for Predicting the Variation in Bearing Preload and Dynamic Characteristics of a Milling Spindle under Thermal Effects