Abstract:Most existing buildings are not equipped with long-term monitoring system. For the structural model updating and damage detection of this type of structures, ambient vibration test is popular as artificial excitation is not required. This article presents in detail the full-scale ambient vibration test, operational modal analysis, and model updating of a tall building. To capture the dynamic properties of the target 20-story building with limited number of sensors, a 15-setup ambient vibration test was designed to cover at least three measurement points (each consists of a vertical and two orthogonal horizontal measured degrees of freedom) for each selected floor. The modal parameters of each setup were extracted from the measured acceleration signals using a frequency domain decomposition method and were combined to form the global mode shape through the least-squares method. Due to the regularity of the building, a simple class of shear building models was employed to capture the dynamic characteristics of the building under lateral vibration. The identified modal parameters of the building were employed for the model updating of the shear building model to identify the distribution of inter-story stiffness. Since the “amount” of the measured information is small when compared to the “amount” of required information for identifying the uncertain parameters, the model updating problem is unidentifiable. To handle this problem, the Markov chain Monte Carlo–based Bayesian model updating method is employed in this study. The identified modal parameters revealed interesting features about the dynamic properties of the building. The well-matched results between model-predicted and identified modal parameters show the validity of the shear building model in this case study. This study provides valuable experience in the area of structural model updating and structural health monitoring.

Structural dynamic model updating under high temperature environment

Structural Dynamic Model Updating in High-Temperature Environment Based on a Two-Stage Modification

A Multi-State Model Updating Method for Structures in High-Temperature Environments

Structural modal identification and MCMC-based model updating by a Bayesian approach

Bayesian model updating of a 20-story office building utilizing operational modal analysis results

A novel dynamic model updating method for composite laminate structures considering non-probabilistic uncertainties and correlations

Hierarchical Model Updating Strategy of Complex Assembled Structures with Uncorrelated Dynamic Modes

Dynamic Characteristics of an Elastic Structure with Thermal Effects

Structural Dynamic Model Updating Based on Multi-Level Weight Coefficients

Model Updating Analysis of Structural Dynamic Problem Based on Multi-Level Weight Coefficients

Bayesian Model Updating of a 250 M Super-Tall Building Utilizing an Enhanced Markov Chain Monte Carlo Simulation Algorithm

Bayesian Structural Model Updating Using Ambient Vibration Data Collected by Multiple Setups

Modeling and evaluation of dynamic degradation behaviours of carbon fibre-reinforced epoxy composite shells

Experimental Modal Analysis of the Composite Laminates with Temperature Variation

Dynamic Parametric Modeling-Based Model Updating Strategy of Aeroengine Casings

Practical model updating of the Ting Kau Bridge through the MCMC-based Bayesian algorithm utilizing measured modal parameters

Dynamic sensitivity-based finite element model updating for nonlinear structures using time-domain responses

A new homotopy approach for stochastic static model updating with large uncertain measurement errors

Bayesian Updating: Reducing Epistemic Uncertainty in Hysteretic Degradation Behavior of Steel Tubular Structures

Model Updating Applied to an Missile Structure

Vibration-based Bayesian model updating of an actual steel truss bridge subjected to incremental damage