Abstract:Thermal effects in hypersonic vehicles, such as severe aerodynamic heating, can greatly influence their thermodynamic behavior. These effects can cause uneven temperature distributions and drastic vibrations, which in turn impact the vibration characteristics of the vehicle structure. To address this issue, a comprehensive approach was developed to study the behavior of honeycomb sandwich structures in high-temperature environments. Firstly, a full-field thermal vibration testing system was established, which allowed for free-boundary multi-temperature region heating at 900 degrees C while applying unconnected excitation. Through this setup, we were able to obtain modal frequencies and modal shapes of the honeycomb sandwich structures under hightemperature conditions. To accurately simulate the heat transfer distribution of the honeycomb sandwich structure, the Q-learning algorithm was employed, which proved effective in achieving accurate and detailed predictions of the full-field heat transfer distribution. Furthermore, for the purpose of further enhancing the accuracy of the finite element model, a multi-state non-uniform temperature field model updating method was utilized. This updated model accounted for the influence of the multi-temperature region heating, resulting in a more reliable representation of the structure's behavior. Additionally, a variational mode decomposition (VMD) framework was applied to visualize and analyze the modal shapes of the honeycomb sandwich structures. By decomposing the time-domain signals with VMD, it is possible to efficiently obtain the modal shapes of the output-only response signals. Experimental results demonstrated that the identification method used in this study produced modal frequencies and modal shapes that closely matched those obtained using the PolyMAX method at room temperature. Therefore, the proposed approach offers an effective means of identifying the modal characteristics of structures subjected to non-uniform temperature fields, particularly in output-only scenarios.

Experimental Modal Analysis of the Composite Laminates with Temperature Variation

Temperature Effect on the Modal Properties of Laminated Composite Structures

Experimental and Simulation Investigation of Temperature Effects on Modal Characteristics of Composite Honeycomb Structure

Study On Variability Of Modal Parameters Of Concrete Structure: Humidity And Moisture Effect

Modal Test and Analysis of A Bridge under the Varying Temperature Condition

Dynamic Characteristics of an Elastic Structure with Thermal Effects

Effect of Temperature on Modal Variability of a Curved Concrete Bridge under Ambient Loads

Monitoring and Analysis of Temperature's Effect on Frequency of Large Span Spatial Steel Structure

Modal Identification of Bridges under Varying Environmental Conditions: Temperature and Wind Effects

Stochastic identification of temperature effects on the dynamics of a smart composite beam: assessment of multi-model and global model approaches

Modal Identification of Structure under Varying Environmental Conditions

Output-only Modal Identification of Full-Field Time-Domain Data for Heated Hybrid Hollow Sandwich Structures

Variational Mode Decomposition Framework for Modal Shape Visualization of Honeycomb Sandwich Structures for Full-Field Vibration Measurements in Non-Uniform Temperature Fields

Modal Damping Coefficient Estimation of Carbon-Fiber-Reinforced Plastic Material Considering Temperature Condition

ADVANCE OF EXPERIMENTAL TECHNOLOGIES FOR STRUCTURAL MODAL TEST IN HIGH TEMPERATURE ENVIRONMENTS

Adaptive Modal Identification of Honeycomb Thin-Walled Composite Structures with Pit Defects under Thermal Modal Testing Using Variational Mode Decomposition Technique Based on Digital Image Correlation

Impact Series Shaker Excitation Approach for Structural Modal Testing in Thermal Environments

Observed Variations of Mode Frequencies of a Prestressed Concrete Bridge with Temperature

Experimental Investigation on the Time-Varying Modal Parameters of A Trapezoidal Plate in Temperature-Varying Environments by Subspace Tracking-Based Method

Numerical simulation and experiment validation of variable stiffness composite laminates with open holes under unidirectional tension

Temperature Effect on Modal Frequencies for a Rigid Continous Bridge Based on Long Term Monitoring