Abstract:Structural deformation is an important consideration in the health monitoring of bridges, and its dependence on temperature variations is quite complex. Based on field measurements performed for an operational cable-stayed bridge, the proposed study investigates mechanisms of thermally induced variations in girder length and mid-span deflection through plane geometric and finite element analyses. The objective of this study is to understand the behaviour of such bridges over annual and diurnal cycles. It has been observed that the girder length and mid-span deflection of a cable-stayed bridge exhibit different modes of the temperature–response correlation. Thermally induced changes in girder length are solely governed by the average girder temperature, and its annual variation in amplitude is significantly larger compared to the diurnal variation. However, thermally induced mid-span deflections are simultaneously influenced by the cable temperature and average girder temperature, and these do not vary monotonously with temperature, thereby resulting in nearly equal variation amplitudes over both annual and diurnal cycles. Temperature-induced deformations of a cable-stayed bridge could well be approximated through multiple linear superposition of thermal-expansion effects of individual components. Besides thermal-expansion coefficients of structural materials, the temperature dependency of mid-span deflection of a symmetrical twin-tower cable-stayed bridge is closely related to the ratio of tower height above the deck to central span of the girder as well as span ratio of the side span to central span. The proposed simplified formulae to estimate the sensitivities of temperature effects could be readily extended to other cable-stayed bridges with different geometric arrangements, thereby providing valuable insights into thermally induced deformation of such bridges.

Monitoring and Analysis of Temperature's Effect on Frequency of Large Span Spatial Steel Structure

WIND-INDUCED RESPONSE OF SPATIAL STRUCTURES WITH MODE COMPENSATION IN FREQUENCY DOMAIN

Field measurement of temperature and stress on steel structure of the National Stadium and analysis of temperature action

Temperature effects on Lotus arena

Strain-temperature Correlation Analysis of a Tied Arch Bridge Using Monitoring Data

Finite element analysis of temperature effect and crack-control measures for ultra-long concrete structures

Correlation Analysis of Large-Span Cable-Stayed Bridge Structural Frequencies with Environmental Factors Based on Support Vector Regression

Modeling of Temperature Distribution in a Reinforced Concrete Supertall Structure Based on Structural Health Monitoring Data

Effect of Non-Uniform Temperature Distribution on the Natural Frequency of Concrete Girder Bridges

Deformation Prediction of Large-Span Spatial Structure Considering Adverse Weather Conditions

Non-uniform temperature field and effect on construction of large-span steel structures

Investigation of temperature effects on wide steel box girder of suspension bridge based on long-term monitoring data

Analysis of temperature-induced deformation and stress distribution of long-span concrete truss combination arch bridge based on bridge health monitoring data and finite element simulation

Temperature Effects on Frequency-Based Damage Detection in Plate-Girder Bridges

Global temperature behavior monitoring and analysis of a three-tower cable-stayed bridge

REAL-TIME SEPERATION OF TEMPERATURE EFFECT ON DYNAMIC STRAIN MONITORING AND MOVING LOAD IDENTIFICATION OF BRIDGE STRUCTURE

Statistical Analysis of Stress Spectra for Fatigue Life Assessment of Steel Bridges with Structural Health Monitoring Data

Stochastic identification of temperature effects on the dynamics of a smart composite beam: assessment of multi-model and global model approaches

Experimental and statistical investigation on temperature gradient of CFST truss chords

Insights into temperature effects on structural deformation of a cable-stayed bridge based on structural health monitoring

Local damage-sensing method for structural members based on stress correlation characteristics