Abstract:Abstract Based on the dual equation of Hamilton system and Duhamel's integral, and the orthogonality of the deflection equations, the mechanical model of homogeneous rectangular thin plate rock mass was established. And the results showed that the effective vibration modes of thin plate granite with four sides fixed were the 1 st , 5 th and 6 th orders under uniform dynamic load, and their vibration frequencies were 310rad/s, 975rad/s and 1309rad/s respectively. Under sustained dynamic load, moreover, the change of the vibration state of the 1 st mode was the most sharp, and the positive and negative alternation of its amplitude was the most frequent in the whole period, which had the most obvious effect on the vibration of the thin plate rock mass. Based on the Fourier transform formula, the Fourier series expressions and waveforms of sustained dynamic loads which contained rectangular wave, triangular wave and impact wave were obtained. The vibration characteristics of thin plate rock mass under these three kinds of sustained dynamic loads, the dynamic distribution of deflection, stress and maximum shear stress, as well as the dynamic damage and failure modes were all obtained. The results showed that plate cracks occurred firstly in the middle of the four sides and these cracks would propagate rapidly along the boundary of the thin plate rock mass; and then, plate cracks occurred at the central of the thin plate and the main develop tendency of these cracks was outward along the long central axis, moreover, these cracks also tended to expand outward along the short side central axis. It could be concluded that the initial failure position of the thin plate rock mass could be determined by the 1 st effective mode, and the development direction and trend of the damage could be determined by 5 th and 6 th effective vibration modes; under sustained dynamic load, tensile-shear failure occurred at four sides and shear failure at four corners; The tensile failure occurred in the central area of the thin plate, which developed into a main crack along the central long axis and a secondary crack along the short central axis, forming an " O- 十 " fracture pattern.

Damage identification of a plate based on response sensitivity analysis in time domain

Damage Identification in Plate Structures Using Sparse Regularization Based Electromechanical Impedance Technique

An analytical method for evaluating the dynamic response of plates subjected to underwater shock employing Mindlin plate theory and Laplace transforms

A Damage Identification Method for a Thin Plate Structure Based on PVDF Sensors and Strain Mode

Modeling, identification and optimization of damage deterioration in the bolted repaired metallic plate

Sensitivity Analysis Using a Reduced Finite Element Model for Structural Damage Identification

Damage Identification in a Plate Structure Based on a Cross-Direction Strain Measurement Method

The Dynamic Response and Failure Model of Thin Plate Rock Mass under Impact Load

High-frequency Emi Signatures for Damaged Plates Using Finite Element Method

Structural damage identification using system dynamic properties

Dynamic Response and Failure Mechanism of Layered Thin Plate Rock Mass Under Sustained Dynamic Load

Structural Damage Identification Based on Transmissibility in Time Domain

Vibration-based damage identification for ship sandwich plate using finite element method

Damage detection with high-frequency electric impedance signals

Sensing Region Characteristics of Smart Piezoelectric Interface for Damage Monitoring in Plate-Like Structures

Quantification of damage expansion influence on frequency response function of plate for structural health monitoring with integral differential method

Damage imaging identification of plate structures based on linear array near-field MUSIC algorithm

Damage identification of single-layer cylindrical latticed shells based on the model updating technique

Damage Detection In Plate Structures Based On Space-Time Autoregressive Moving Average Processes

Damage Detection in Plates Structures Based on Frequency Shift Surface Curvature

Structural Damage Identification Based on Integrated Utilization of Inverse Finite Element Method and Pseudo-Excitation Approach