Abstract:The attempt to integrate the applications of conventional structural deformation reconstruction strategies and vibration-based damage identification methods is made in this study, where, more specifically, the inverse finite element method (iFEM) and pseudo-excitation approach (PE) are combined for the first time, to give rise to a novel structural health monitoring (SHM) framework showing various advantages, particularly in aspects of enhanced adaptability and robustness. As the key component of the method, the inverse finite element method (iFEM) enables precise reconstruction of vibration displacements based on measured dynamic strains, which, as compared to displacement measurement, is much more adaptable to existing on-board SHM systems in engineering practice. The PE, on the other hand, is applied subsequently, relying on the reconstructed displacements for the identification of structural damage. Delamination zones in a carbon fibre reinforced plastic (CFRP) laminate are identified using the developed method. As demonstrated by the damage detection results, the iFEM-PE method possesses apparently improved accuracy and significantly enhanced noise immunity compared to the original PE approach depending on displacement measurement. Extensive parametric study is conducted to discuss the influence of a variety of factors on the effectiveness and accuracy of damage identification, including the influence of damage size and position, measurement density, sensor layout, vibration frequency and noise level. It is found that different factors are highly correlated and thus should be considered comprehensively to achieve optimal detection results. The application of the iFEM-PE method is extended to better adapt to the structural operational state, where multiple groups of vibration responses within a wide frequency band are used. Hybrid data fusion is applied to process the damage index (DI) constructed based on the multiple responses, leading to detection results capable of indicating delamination positions precisely.

Damage identification of single-layer cylindrical latticed shells based on the model updating technique

Model-informed Deep Learning Strategy with Vision Measurement for Damage Identification of Truss Structures

Locate Damage Based on Change in Structural Shape Calculated from Uniform Load Surface

A Data‐driven Combined Deterministic‐stochastic Subspace Identification Method for Condition Assessment of Roof Structures Subjected to Strong Winds

Structural Damage Identification Based on Integrated Utilization of Inverse Finite Element Method and Pseudo-Excitation Approach

Structural damage identification using static test data and changes in frequencies

Damage Assessment Using The Energy Dissipation Ratio Of Acceleration Signals

Structural damage detection based on cross-correlation function with data fusion of various dynamic measurements

Exploration of Damage Identification Method for a Large-Span Timber Lattice Shell Structure in Taiyuan Botanical Garden based on Structural Health Monitoring

A Strain Modal Flexibility Method to Multiple Slight Damage Localization Combined with a Data Fusion Technique

Test Analysis of Detection of Damage to a Complicated Spatial Model Structure

A data fusion-based approach for structural damage detection with distributed long-gauge strain measurements

A Multi-Objective DIRECT Algorithm Towards Structural Damage Identification with Limited Dynamic Response Information

Damage detection of bridge structures under moving loads based on CEEMD and PSD sensitivity analysis

Solution to the problem of bridge structure damage identification by a response surface method and an imperialist competitive algorithm

Two-stage damage detection to a benchmark structure using ambient data

Structural damage identification with unknown external inputs based on the sparse constraint

Unsupervised structural damage identification based on covariance matrix and deep clustering

Damage Diagnosis of A Two-Storey Spatial Steel Braced-Frame Model

Structural damage identification using system dynamic properties

An application of finite element model updating for damage assessment of a two-story reinforced concrete building and comparison with lidar