Abstract:Despite recent advances and improvements in modeling and prediction of the dynamics of the machining process, an efficient machining process is limited due to chatter and instability of machining system. In fact, the machining system contains various kinds of joints, which cause difficulties in dynamics modeling, simulation and prediction. Moreover, the flexible support system results in large deformation and violent vibration of the workpiece when machining, and the thin-walled workpiece easily gives rise to the chatter of the machining system. Therefore, the dynamics of the flexible support system was considered to calculate stability lobe diagram in the modeling of milling process. The whole machining system was regarded as a closed loop composed by the machine tool structures, support, workpiece and machining process. In this paper, the receptance coupling (RC) method was introduced to predict the dynamics of the closed machining system. A milling process was taken for example to predict the chatter limitations using the dynamics of closed model. The mathematical model of the machining system (machine tool structures, spindle, holder and tool), together with the details of joint contacts, was given based on the RC method. The RC model was used to obtain the dynamics of the system, while receptance of the tool point was coupled. Based on the coupling model of the machining system, the depth limitations under different speeds were estimated for the technology parameter optimization in milling process. The response was considered to be the sum of the cutting point and the support system. The flexibility of the support system was considered to be the feedback of the cutting stiffness. By this means, the traditional model was modified to calculate the stability lobe diagram based on the dynamics of the spindle and support system. Furthermore, the milling experiment was carried out to verify the prediction results, and the dominant natural frequencies of receptance at tool point were obtained by modal testing to define the stability lobe diagram. It was found that the chatter results matched well with the stability lobes. It was concluded that the support system with poor stiffness might cause violent chatter especially when the workpiece was thin-walled. The cutting depth limitations of the flexible support system were lower than that of the rigid one. Moreover, this closed model of the machining system is appropriate for the chatter prediction of the flexible support system or thin-walled workpiece, so it is helpful for a better parameter optimization.

Vibration modal analysis of the cutter and main shaft system in heavy milling process of water chamber head

Experimental and simulation study on chatter stability region of integral impeller with non-uniform allowance.

Finite Element Simulation and Analysis of Deformation in Machining of Aeronautical Aluminum Alloy Thin-Walled Workpiece

Modal parameter identification of general cutter based on milling stability theory

Bifurcation and chaos analysis of cutter head-spindle system of VH-CATT gear machine tool considering time-varying stiffness

Investigation on the Tool Wear Suppression Mechanism in Non-Resonant Vibration-Assisted Micro Milling

Nonlinear dynamic modeling and vibration analysis of whole machine tool

Analysis of Fatigue Damage of Cemented Carbide Insert During the Heavy-Duty Milling of Water Chamber Head

Chatter stability analysis and prediction for elliptical ultrasonic vibration-assisted milling process

Chatter suppression analysis for variable pitch cutter in milling

Simulation and experimental research on modal analysis for a new 5-axis superalloy blade machine tool

Chatter and Surface Waviness Analysis in Oerlikon Face Hobbing of Spiral Bevel Gears

Dynamic Cutting Force Model and Vibration Analysis of the Cutterhead in TBM

Testing and Analysis of the Dynamic Characteristics of Vertical Machining Centers

Stability analysis of thin-walled parts end milling considering cutting depth regeneration effect

Research on vibration behavior and chatter stability of big-sized gear hobbing machine

Stability Prediction of Milling Process with Closed Machining System Dynamics with Flexible Thin-Walled Workpiece

Sensitivity Analysis and Monte Carlo Based Uncertainty Quantification of the In-process Modal Parameters in Milling

Design and finite element analysis of a variable cross-section cutter ring

Investigation of the profile of the blade considering machining vibration based on finite element analysis

A complete methodology for identifying dynamics of heavy machine tool through operational modal analysis