Abstract:Abstract This paper presents a transcritical / supercritical CO2 (sCO2) recompression Brayton cycle using a novel rotary liquid piston compressor (LPC). This new type of multi-phase compressor utilizes a pumped motive fluid that interfaces with sCO2 in a rotating ducted cylinder for efficient CO2 compression at lower hardware costs. The energy required to pump the motive fluid can be significantly lower than that required to compress CO2 in a traditional compressor. The compressor utilizes a low compressibility, low diffusivity, low solubility liquid as the motive fluid to pressurize process fluid (sCO2) stream. Its use as a replacement for the main compressor in a recompression sCO2 Brayton cycle is expected to reduce compression power by more than 10% while maintaining robust operation over a wide range of ambient temperatures and CO2 densities that are typical for dry-cooled sCO2 cycles in arid climates. The new rotary liquid piston compressor also eliminates the need for gas lubricated bearings & dry gas seals, thus providing added advantage of rotordynamic stability, mechanical robustness & life over traditional compressors. Thermodynamic cycle analyses and 1D compressible flow analysis of multi-phase compression inside the rotary LPC is presented. An advanced 3D multi-phase flow model is developed to study fundamental physics of multi-species transport, diffusion & mixing of species and liquid-supercritical interface compression & decompression. This 3D model is used to validate some of the assumptions made in the 1D model. Various performance curves are developed to study the effect of lead flow, rotational speed and compressor inlet temperature on CO2 exit mass flow rate, % mixing of the two species, compression power requirements and overall compression efficiency. Optimization study on above system variables is carried out and a set of guidelines for use of rotary LPC in sCO2 compression is established.

Experimental Investigation of High-power CO2 Compressor Efficiencies at Varied Revolutions

Experimental investigation on a two-stage CO2 compressor with high back pressure

Experimental Study On A Two-Stage Rolling Piston Co2 Compressor Based On P-V Indicator Diagrams

Development and Performance Measurements of a New Hermetic Rotary CO2 Compressor

Performance Simulation Analysis of a Novel Dual-piston Two-Stage Carbon Dioxide Linear Compressor

Experimental Investigation on Off-Design Characteristics of R290 Rolling Piston Compressor

Theoretical and Experimental Study on the Performance of CO2 Hermetic Scroll Compressor

The roticulating concept air compressor: experimental and numerical investigation

Development of a Commercial Transcritical CO_2 Compressor

A Novel Oil-free Dual Piston Compressor Driven by a Moving Coil Linear Motor with Capacity Regulation Using R134a

Aerodynamic Optimization Design of a 150 kW High Performance Supercritical Carbon Dioxide Centrifugal Compressor without a High Speed Requirement

Optimization of high efficient CO2 screw refrigeration compressor

The Theoretical and Experimental Research on the Thermodynamic Process in Transcritical Carbon Dioxide Piston Compressor

Experimental study on the performance of a twin-screw CO 2 compressor in NH 3/CO 2 cascade refrigeration system

Study of A Rotary Vane Expander for the Transcritical Co2 Cycle-Part I: Experimental Investigation

Numerical Investigation On The Flow Characteristics Of A Supercritical Co2 Centrifugal Compressor

Theoretical and Experimental Investigations on a 12 Kw Oxford-type Dual-Opposed Moving-Coil Linear Compressor

Operational optimisation of a novel dual-piston linear compressor: Simulation and experiment

Experimental investigation on the internal working process of a CO2 rotary vane expander

Transcritical / Supercritical CO2 Recompression Brayton Cycle Using a Novel Rotary Liquid Piston Compressor

Design and Performance Analysis of a Supercritical CO2 Centrifugal Compressor With Variable Geometry