Abstract:The ejector refrigeration system (ERS) using zeotropic mixtures obtains better performance and lower refrigeration temperature than that of the ERS using pure refrigerants, and the characteristics of the zeotropic mixture ejector are a theoretical basis for its optimal design. However, there are few literatures on the performance mechanism of the zeotropic mixture ejector. From the perspective of the binary zeotropic mixture, the R32/R245fa ejector model is developed in this paper based on computational fluid dynamics (CFD) theory, and an experimental setup is also built to validate the CFD model of the ejector. Firstly, the mixing process characteristics of two streams with different composition ratios entering the ejector are investigated, and the key parameters affecting the mixing process are evaluated. Secondly, the impact of zeotropic mixture composition ratio on the ejector's performance is analyzed in terms of entrainment ratio, velocity distribution, and pressure distribution. Finally, aiming at the entrainment ratio, a performance comparison between the R32/R245fa ejector and the pure refrigerant R245fa ejector is conducted under various primary stream conditions, yielding the optimal composition ratio range for the mixture when the R32/R245fa ejector outperforms the R245fa ejector. The findings demonstrate that the R32 mass fraction in both the primary and secondary streams significantly influences the performance of the R32/R245fa ejector. The composition distribution inside the ejector is primarily influenced by the shock chain. The optimal entrainment ratio is achieved by selecting an appropriate R32 mass fraction in the primary stream, and increasing the R32 mass fraction in the secondary stream leads to a linear enhancement in the entrainment ratio. Moreover, when the R32 mass fraction in the primary stream falls within the range of 0-0.08, the entrainment ratio of the R32/R245fa ejector surpasses that of the R245fa ejector operating in the critical mode. Furthermore, this advantage becomes more pronounced as the R245fa ejector gradually deviates from the critical mode.

Mathematical Model and Experimental Validation for Mass Entrainment Ratio of Ejector System with Single Phase R744

Experimental validation of a hybrid ejector model with refrigerant R141B

Novel Ejector Model with Experimental Validation

An Investigation on the Component Efficiencies of a Small Two-Phase Ejector

Progress of mathematical modeling on ejectors

A Comparative Study on Regulation Methods for Transcritical CO2 Ejector Expansion Refrigeration System.

A CFD-based Investigation of the Two-Phase R744 Ejectors: Flow Pattern & Nozzle Design

Simplified Ejector Model for Control and Optimization

Theoretical Study on Predicting the Performance of Steam Ejector by Analogy Method

Novel Ejector Model for Performance Evaluation on Both Dry and Wet Vapors Ejectors

A 1D Model to Predict Ejector Performance at Critical and Sub-Critical Operational Regimesmodèle Unidimensionnel Utilisé Pour Prévoir La Performance D'un Éjecteur Sous Des Conditions De Fonctionnement Critiques Et Sous-Critiques

Zeotropic mixture ejector: modeling approach, validation, and assessment based on composition ratio

Simulation Analysis of Ejector Optimization for High Mass Entrainment under the Influence of Multiple Structural Parameters

Analysis on the Optimal Mixing Pressure and Efficiency Limit of an Ideal Ejector

Numerical Study on the Structural Optimization of R290 Two-Phase Ejector with a Non-Equilibrium CFD Model

A 1D model to predict ejector performance at critical and sub-critical operational regimes

Development of Control Model for Critical Operation Ejector

A Novel Relaxation Drift Model for Simulating Liquid-Vapor Momentum Non-Equilibrium in Two-Phase Ejectors

Investigation on the Influence of Geometric Parameters on Two-Phase Ejector Performance with R290

A full operating conditions ejector model for refrigeration systems driven by low-grade heat sources

An Improved 1-D Thermodynamic Modeling of Small Two-Phase Ejector for Performance Prediction and Design