Abstract:As a result of increasing energy demands and accelerated environmental problems, there is an urgent need to improve the thermal efficiency of ultra supercritical (USC) power plants. To achieve this goal, advanced ultra-supercritical (A-USC) technologies with the main steam temperature of 700 similar to 750 degrees C and pressure of 35 MPa have been developed quickly in recent years. One of the most promising candidate Ni-based superalloys for the main steam pipe of 700 degrees C ultra-supercritical coal-fired power plants is Inconel 740H, which is a modified version of Inconel 740 developed by Special Metals Corp (SMC). Compared with IN740, the Ti/Al ratio in IN740H is lowered in order to stabilise the microstructure at long ageing times. In addition, the Nb content is lowered to improve the weldability. In this work, the microstructure evolutions, the nucleation and propagation mechanisms of microcracks in the nickel base superalloy Inconel 740H at 750 degrees C high temperature were studied by the self-developed in situ high temperature tensile stage inside a SEM. The results showed that under the uniaxial tensile stress at 22 degrees C room temperature and 750 degrees C high temperature conditions, the grain boundaries of Inconel 740H alloy are al-ways the most primary crack sources. The strength of grain boundaries is higher than that of grains under the room temperature, and the microcracks will be nucleated at the grains as well, but the relative strength of grain boundaries will be weaken under the high temperature, which makes the microcracks tend to nucleate at grain boundaries. The experimental results also showed that the influence of high temperature on the mechanical properties is very significant, the high temperature reducing the activate energy of slip and weakening the strength of the grain boundaries, so that more slip systems activated and the grain boundaries occurring bending and sliding deformation, so further enhance the ability of plastic deformation of alloy. However, the reduction of relative strength of alloy grain boundaries leads to microcracks nucleation and propagation more easily from grain boundaries and lower the yield strength and tensile strength of alloy.

Coarsening Behavior of Grain Boundary M23C6 in Inconel 740H During Creep

Inconsistent creep between dendrite core and interdendritic region under different degrees of elemental inhomogeneity in nickel-based single crystal superalloys

Creep Behavior and Deformation Mechanism of a Third-Generation Single Crystal Ni-Based Superalloy at 980 °C

Evolution and Structure Characterization of the Carbide and Boride during Creep in A Ni-based Superalloy

Detrimental Effect of Cellular Precipitation on the Creep Strength of Inconel740h

Creep Behavior and Microstructure Evolution of Ni-based Alloy IN617 at 1000 °C

Microstructure Evolution and Mechanical Properties of Inconel 740H During Aging at 750 °C

Influence of composition and precipitation evolution on damage at grain boundaries in a crept polycrystalline Ni-based superalloy

Microstructure and Damage Evolution of Inconel 740H Welded Joint during Creep Process at 750 °C

Precipitation and decomposition in CoCrFeMnNi high entropy alloy at intermediate temperatures under creep conditions

On the coarsening mechanism and deformation of borides under annealing and creep in a polycrystalline superalloy

Microstructure characterization and strengthening behavior of a non-γ' phase nickel-based alloy C-HRA-2 after creep at 650 °C

Creep behaviour and microstructural evolution of Al x CrMnFeCoNi high-entropy alloys

Microcrack Nucleation and Propagation Investigation of Inconel 740H Alloy under in Situ High Temperature Tensile Test

Creep Performance Study of Inconel 740H Weldment Based on Microstructural Deformation Mechanisms

Microstructure Evolution and Dislocation Mechanism of a Third-Generation Single-Crystal Ni-Based Superalloy during Creep at 1170 °C

High temperature creep behavior and damage mechanism of an advanced PM Ni‐based superalloy

Tensile creep behavior and mechanism of CoCrFeMnNi high entropy alloy

Creep behaviors of fine-grained Ni-base powder metallurgy superalloys at elevated temperatures

Creep Behavior of a Single Crystal Nickel-Based Superalloy Containing High Concentrations of Re/Ru at an Intermediate Temperature

Intermediate-Temperature Creep Deformation and Microstructural Evolution of an Equiatomic FCC-Structured CoCrFeNiMn High-Entropy Alloy