Experiment study on the stiffness of hyperboloid shallow shell of autobody

Lihong ZHAO,Zhongwen XING,Chengxi LEI,Xiaohui ZHANG
DOI: https://doi.org/10.11951/j.issn.1005-0299.20150315
IF: 1.8
2015-01-01
Materials Science and Technology
Abstract:The experiment models and the test system of siffness analysis for hyperboloid shallow shell automotive body panel parts were established based on. The hyperboloid shallow shells were formed through different process parameters by varying the blank holding force ( BHF) and drawing depth. The stiffness test was performed with five boundary conditions. The relationship of the influences of blank holding force, draw depth and boundary conditions on the stiffness of the parts was also obtained. The results showed that the boundary condition plays an important role in determining the stiffness, i. e. the greater the constraint, the greater the stiffness. The importance of boundary condition on stiffness is greater than that of process parameters. Finally, the optimised boundary condition of the stiffness test was determined. In general, greater blank holding force and draw depth lead to higher stiffness. Moreover, the influence of above mentioned process parameters on the stiffness is much greater than thickness reduction. The process parameters can be adjusted to improve the stiffness of automotive body panel in the actual production. It is expected that this research will provide the theoretical and practical guideline for improving the stiffness of the car body panels.
What problem does this paper attempt to address?