Abstract:CO2 sequestration via mineralization of steel slag has received widespread attention due to its ability to achieve in-situ CO2 sequestration in steel industries and high-value utilization of steel slag. The final CO2 sequestration capacity of steel slag is closely related to the reaction parameters (i.e., reaction duration, reaction temperature, CO2vol concentration, and liquid-solid ratios) of mineralization. The reaction parameters may have synergistic effects on the ability of steel slag to sequestrate CO2. Therefore, the single-factor (one-factor-at-a-time) experimental strategy can't obtain optimal process parameters. Herein, response surface methodology and the Box-Behnken Design were employed in determining optimal conditions. It is found that the combined effects of CO2 concentration in combination with reaction temperature and liquid-solid ratio significantly influence the sequestration process (P = 0.0082 and P < 0.0001, respectively). Conversely, the combined effects of reaction duration with liquid-solid ratio and CO2 concentration were found to be less significant (P = 0.6905 and P = 0.6114, respectively). The reasons behind this observation can be ascribed to the focus of this research on the later stages of the reaction, during which it proceeds smoothly. Additionally, alterations in temperature, liquid-solid ratio, and CO2 concentration not only affect the initial pH, CO2 dissolution rate and quantity, and reaction kinetics but also alter the patterns of their collective impact on CO2 sequestration. The CO2 capture could reach 179.1 g-CO2/kg-steel slag at the optimal condition (i.e., 56.14 °C reaction temperature, 6.66 ml/g liquid-solid ratio, 44.53 wt.% CO2 concentration, and 286.73 mins reaction time), compared to single-factor stepwise optimization, which improves by about 9.84 %. Implementing this optimized mineralization process could enable the Chinese steel industry to capture an estimated 27.4 million tons of CO2 annually, based on an annual production of 153 million tons of steel slag.

Study on Carbonization Process of Steel Slag Under Pressure Steam Conditions

Analysis of Mechanical Performance and Microstructure of Steel Slag Processed with Accelerated Carbonation

Effect of Carbonation Treatment on the Properties of Steel Slag Aggregate

Research on the Properties of Steel Slag with Different Preparation Processes

Direct Gas-Solid Carbonation Kinetics of Steel Slag and the Contribution to in Situ Sequestration of Flue Gas CO(2) in Steel-Making Plants.

Effect of CaO-SiO2-FeO slag system on coal gasification reaction in CO2-Ar atmosphere and kinetic analysis

Effect of CO2 treatment on the microstructure and properties of steel slag supplementary cementitous materials

A Review on the Carbonation of Steel Slag: Properties, Mechanism, and Application

Analysis of Hydration Mechanism of Steel Slag-Based Cementitious Materials under Saline–Alkaline-Coupled Excitation

Enhanced Steelmaking Slag Mineral Carbonation in Dilute Alkali Solution

Performance of steel slag in carbonation–calcination looping for CO2 capture from industrial flue gas

Accelerated carbonation of steel slag monoliths at low CO2 pressure – microstructure and strength development

Evaluation of the Carbon Sequestration Potential of Steel Slag in China Based on Theoretical and Experimental Labile Ca

Improving the Carbonation of Steel Slags Through Concurrent Wet Milling

Effects of the Aging Treatment Process on the Properties of Steel Slag

An efficient molten steel slag gas quenching process: Integrating carbon solidification and waste heat recovery

Interdependent factors contributing towards carbonation of steel slag compact: consideration of casting pressure, water dosage and carbonation duration

Evaluation of Potential Factors Affecting Steel Slag Carbonation

Utilization of accelerated carbonation to enhance the application of steel slag: a review

Modeling and response surface methodology optimization of reaction parameters for aqueous mineral carbonation by steel slag

Investigation of Convertor Sludge Pellet for Steelmaking