Abstract:Hydrophilic silica (SiO2) nanoparticles (average size=7nm), which act as inorganic acids at low pH (<2), were added together with a PEO–PPO–PEO triblock copolymer dispersant to a random disulfonated poly(arylene ether sulfone) copolymer in the potassium salt (SO3−K+) form in order to control permeation and rejection characteristics of the homopolymer. The dispersants (shell) absorbed on the surface of SiO2 nanoparticles (core) formed a distinctive core–shell structure. The PEO units located at the outside of the dispersant formed complexes with SO3−K+ groups of BPS-20 via ion–dipole interactions. These interactions induced a compatible binary system following the Flory–Fox equation associated with glass transition temperature (Tg) depression and prevented extraction of the water-soluble dispersant even under aqueous conditions. The ion–dipole interaction, combined with hydrogen bonding between SiO2 and the dispersant, caused SiO2 nanoparticles to be well distributed within the BPS-20 matrix up to a limit of 1wt.% of SiO2 and minimized the formation of non-selective cavities within the matrix's hydrophilic water channels. The resulting BPS-20_SiO2 nanocomposites showed improved salt rejection and reduced ionic conductivity. These trends are analogous to those of disulfonated copolymer systems, with polar groups creating hydrogen bonding or acid–base complexation with SO3−K+ groups in BPS copolymers. Well dispersed SiO2 nanoparticles in highly water-permeable desalination membranes are expected to result in an increase in salt rejection but very little change in water permeability. The addition of nanoparticles to desalination membranes may offset the permeability-selectivity tradeoff observed in polymer membranes. Above 1wt.%, SiO2 nanoparticles increased both the interchain distance between polymer chains and the water uptake. However, the increased hydrophilicity due to high SiO2 content did not yield improved water permeation of the nanocomposite membranes. The SiO2 nanoparticles acted as barriers, hindering water passage (restrictive diffusion) and lowering water permeability. Meanwhile, acidic hydroxyl groups (OH2+) on the SiO2 surface in the sulfonate matrix led to improved ionic conductivity, but NaCl rejection capability decreased because the concentration of SO3−K+ was diluted by highly absorbed water molecules, resulting in weakened Donnan exclusion. The mechanical properties and chlorine resistance of all BPS-20_SiO2 nanocomposites were comparable to those of BPS-20.

Effect of Inorganic Additives on the Performance of Sulfonated Heterocyclic Copoly(ether sulfone) Composite Membranes

Effect of mixed crosslinking agents on performance of thin-film-composite membranes

Polyamide/PVC Based Composite Hollow Fiber Nanofiltration Membranes: Effect of Substrate on Properties and Performance

Preparation and Characterization of Sulfated Carboxymethyl Cellulose Nanofiltration Membranes with Improved Water Permeability

Clay Nanosheets As Charged Filler Materials for High-Performance and Fouling-Resistant Thin Film Nanocomposite Membranes

Effect of Additives on the Performance of PPBES Composite Forward Osmosis Hollow Fiber Membranes

Study of High Performance Sulfonated Polyether Ether Ketone Composite Electrolyte Membranes

Achieving Better Balance on the Mechanical Stability and Conduction Performance of Sulfonated Poly(ether Ether Ketone) Proton Exchange Membranes Through Polydopamine/polyethyleneimine Co-Modified Poly(vinylidene Fluoride) Nanofiber As Support

Effect of Additives on the Morphology and Performance of Symmetric Network PVDF Membranes

Hydrophilic Silica Additives for Disulfonated Poly(arylene Ether Sulfone) Random Copolymer Membranes

Performance Enhancement of Kaolin/Chitosan Composite-Based Membranes by Cross-Linking with Sodium Tripolyphosphate: Preparation and Characterization

Development of High-Antifouling PPSU Ultrafiltration Membrane by Using Compound Additives: Preparation, Morphologies, and Filtration Resistant Properties.

Tailoring Properties and Performance of Polyamide Composite Nanofiltration Membranes by LiCl-added Interfacial Polymerization

Positively Charged Polysulfonamide Nanocomposite Membranes Incorporating Hydrophilic Triazine-Structured COFs for Highly Efficient Nanofiltration

Effects of calcium carbonate nano-particles on the properties of PVDF/nonwoven fabric flat-sheet composite membranes for direct contact membrane distillation

Effect of pore-forming/hydrophilic additive anchorage on the mesoporous structure and sieving performance of a blended ultrafiltration (UF) membrane

Modified Nanocrystal Cellulose/fluorene-Containing Sulfonated Poly(ether Ether Ketone Ketone) Composites for Proton Exchange Membranes

Effect of Non-Solvent Additives on the Morphology and Separation Performance of Poly(m-Phenylene Isophthalamide) (PMIA) Hollow Fiber Nanofiltration Membrane

Investigating the Impact of the Sulfonation Degree in Sulfonated Polyphenylsulfone (sPPSU) on PES/sPPSU Polymer Blend Membranes

Promising Fluorine-Free Ion Exchange Membranes Based on a Poly(ether-block-amide) Copolymer and Sulfonated Montmorillonite: Influence of Different Copolymer Segment Ratios

Effects of the Addition of Nano-Sized SiO2 on the Structure and Performance of PVDF/SiO2ultrafiltration Membrane