Abstract:Functional additives have been widely utilized for the membrane structure modulation and performance improvement during the nonsolvent-induced phase separation process, but the resulted membranes easily suffer from additives' inhomogeneous dispersity and compatibility with the polymer matrix. Herein, a facile and robust strategy, i.e., one-step water-induced phase separation, was proposed for the preparation of polyelectrolytes-contained composite membranes. Polyanion (dopamine modified polyacrylic acid) and polycation (quaternized chitosan paired with bis(trifluoromethane-sulfonyl)imide) were first premixed in dimethyl sulfoxide and used as polyelectrolyte additives in a polysulfone (PSF) solution, and then a uniform PSF-based casting solution was readily obtained. During the solvent–water exchange process, polymer solidification and polyelectrolyte complexation were simultaneously triggered, in situ generating a polyelectrolyte complex fixed within the membrane matrix. Ultrafiltration membranes with hierarchical structures were notably tailored through altering the concentration, molecular weight, and type of polyelectrolytes. The obtained membrane exhibited a water flux of 672 L·m–2·h–1, three times over the raw PSF membrane, while almost maintaining high bovine serum albumin (BSA) rejection. This work paves a straightforward and convenient path for the preparation of composite membranes with tunable architecture and properties.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c24059.Characterization of PAA-DA (Figure S1); SEM image of the polyelectrolyte complex from QCS-TFSI and PAA-DA (Figure S2); surface SEM images of different UF membranes (Figure S3); the porosity and pore size distribution of different membranes (Figure S4); LF-NMR T2 spectra of PSF and PSF-PEs-2.0 membranes (Figure S5); the viscosities of casting solutions with different molecular weight of PAA (Figure S6); and cross-sectional SEM images of UF membranes with different molecular weight of PAA (Figure S7) (PDF)This article has not yet been cited by other publications.

Performance Enhancement of Kaolin/Chitosan Composite-Based Membranes by Cross-Linking with Sodium Tripolyphosphate: Preparation and Characterization

Polyamide/PVC Based Composite Hollow Fiber Nanofiltration Membranes: Effect of Substrate on Properties and Performance

Clay Nanosheets As Charged Filler Materials for High-Performance and Fouling-Resistant Thin Film Nanocomposite Membranes

Effectiveness of a Coagulation Step and Polyester Support on Blend Polyvinylchloride Membrane Formation and Performance

Fabrication of a Cation-Exchange Membrane Via the Blending of SPES/N-Phthaloyl Chitosan/MIL-101(Fe) Using Response Surface Methodology for Desalination

Achieving Better Balance on the Mechanical Stability and Conduction Performance of Sulfonated Poly(ether Ether Ketone) Proton Exchange Membranes Through Polydopamine/polyethyleneimine Co-Modified Poly(vinylidene Fluoride) Nanofiber As Support

Preparation and Properties of Chitosan/acidified Attapulgite Composite Proton Exchange Membranes for Fuel Cell Applications

A novel UV-crosslinked sulphonated polysulfone cation exchange membrane with improved dimensional stability for electrodialysis

Novel Composite Anion Exchange Membranes Based on Quaternized Polyepichlorohydrin for Electromembrane Application

Synthesis of a chitosan-clay nanomembrane by pH control and its thermal stability in aqueous environments

Sustainable fabrication of chitosan membranes with optimized performance for ultrafiltration

Effect of Crosslinking on the Properties of Membrane Formulated from Quaternized Chitosan

Preparation of a PVA/Chitosan/Glass Fiber Composite Membrane and the Performance in CO2 Separation

Anti-Foulant Ultrafiltration Polymer Composite Membranes Incorporated with Composite Activated Carbon/Chitosan and Activated Carbon/Thiolated Chitosan with Enhanced Hydrophilicity

The effects of surface modifications on preparation and pervaporation dehydration performance of chitosan/polysulfone composite hollow-fiber membranes

The effect of chitosan (CS) coagulation bath on structure and performance of polylactic acid (PLA) microfiltration membrane

Porous organic polymer nanosheets doped multistage water channel ultrafiltration membrane: Accelerated phase inversion process and in-situ covalent crosslinking strategy

One-Step Water-Induced Phase Separation Simultaneously Triggering Polymer Solidification and Polyelectrolyte Complexation for Porous Ultrafiltration Membranes

Preparation and Property Investigation of Chitosan-Based Anion-Exchange Membranes with Different Cross-Linking Structures

Fabrication of chitosan membranes via aqueous phase separation: Comparing the use of acidic and alkaline dope solutions

Study of High Performance Sulfonated Polyether Ether Ketone Composite Electrolyte Membranes