Abstract:In this study, flat sheet asymmetric polyphenylsulfone (PPSU) ultrafiltration membranes with enhanced antifouling properties were prepared with a non-solvent induced phase separation (NIPS) method through compound additives containing a polymeric pore-forming agent, a small molecular non-solvent and a surfactant. The formation processes of the porous asymmetric membranes with different kinds of additives were studied in detail, and the microstructure controllable preparation of membrane was achieved by establishing a bridge between the membrane preparation parameters and separation performances. All prepared membranes were characterized by using a scanning electron microscope (SEM), contact angle analysis, porosity, maximum pore size, water and BSA solution permeability studies. The performance efficiency of the membrane was evaluated by using BSA as a model foulant in terms of permeability, solute rejection (R), Rm (membrane inherent resistance), Rc (cake layer resistance), and Rp (pore plugging resistance). The results showed that when the compound additives were used, the inter-connected pores were observed, maximum pore size, contact angle and membrane filtration resistance decreased, while the porosity increased. When PVP compound additives were added, the water flux increased from 80.4 to 148.1 L/(m2·h), the BSA rejection increased from 53.2% to 81.5%. A similar trend was observed for membranes with added PEG compound additives; the water flux and BSA rejection simultaneously increased. The filtration resistance decreased as a result of compound additives. The uniformity of membrane and the number of effective pores could be enhanced by adding compound additives through the cooperation of different additives.

Effect of Additives on the Performance of PPBES Composite Forward Osmosis Hollow Fiber Membranes

Effect of mixed crosslinking agents on performance of thin-film-composite membranes

Polyamide/PVC Based Composite Hollow Fiber Nanofiltration Membranes: Effect of Substrate on Properties and Performance

Effect of Amphiphilic Hyperbranched-Star Polymer on the Structure and Properties of Pvdf Based Porous Polymer Electrolytes

Effect of Additives on the Morphology and Performance of Symmetric Network PVDF Membranes

Effect of addition of alcohols on preparation of reverse osmosis composite membrane with high flux by interfacial polymerization

EFFECT OF ADDITIVES ON THE STRUCTURES AND PROPERTIES OF POLY (PHTHALAZINE ETHER SULFONE KETONE)(PPESK) ULTRAFILTRATION MEMBRANE

Effect of Polyethylene Glycol Additive on the Structure and Performance of Fabric-Reinforced Thin Film Composite

Achieving Better Balance on the Mechanical Stability and Conduction Performance of Sulfonated Poly(ether Ether Ketone) Proton Exchange Membranes Through Polydopamine/polyethyleneimine Co-Modified Poly(vinylidene Fluoride) Nanofiber As Support

Effect of Non-Solvent Additives on the Morphology and Separation Performance of Poly(m-Phenylene Isophthalamide) (PMIA) Hollow Fiber Nanofiltration Membrane

Preparation and characterization of improved fouling-resistant PPESK ultrafiltration membranes with amphiphilic PPESK-graft-PEG copolymers as additives

Formation kinetics and characterization of polyphthalazinone ether ketone hollow fiber ultrafiltration membranes

Preparation of poly(phthalazinone-ether-sulfone) sponge-like ultrafiltration membrane.

POSS-containing Delamination-Free Dual-Layer Hollow Fiber Membranes for Forward Osmosis and Osmotic Power Generation

Modification of Polysulfone Hollow Fiber Ultrafiltration Membranes Using Hyperbranched Polyesters with Different Molecular Weights

Composite Ultrafiltration Membranes from Polymer and Its Quaternary Phosphonium-Functionalized Derivative with Enhanced Water Flux

Development of High-Antifouling PPSU Ultrafiltration Membrane by Using Compound Additives: Preparation, Morphologies, and Filtration Resistant Properties.

Fabrication and Performance of PET Mesh Enhanced Cellulose Acetate Membranes for Forward Osmosis.

Novel Thin Film Composite Forward Osmosis Membrane of Enhanced Water Flux and Anti-Fouling Property with N-[3-(Trimethoxysilyl) Propyl] Ethylenediamine Incorporated

Study of High Performance Sulfonated Polyether Ether Ketone Composite Electrolyte Membranes

Poly (phthalazinone Ether Sulfone Ketone) Properties and Their Effect on the Membrane Morphology and Performance