Abstract:This study examines the mechanical properties and wear mechanisms of magnesium (Mg) metal matrix composites reinforced with titanium (Ti) and silicon carbide (SiC) particles. Three different composite formulations were investigated: Mg-30 wt% Ti (A), Mg-25 wt% Ti-5 wt.% SiC (NB), Mg-20 wt% Ti-10 wt% SiC (NC), and Mg-15 wt% Ti-15 wt% SiC (ND). These composites were fabricated through ball milling and spark plasma sintering (SPS). The incorporation of SiC particles significantly enhanced grain refinement and phase formation within the composites. Density analysis revealed that the actual densities of the composites were lower than the theoretical values, with Composite A exhibiting the highest actual density of 2.15 g/cm3 and the lowest porosity of 16.31%. The introduction of SiC particles increased porosity, with Composite NB displaying the highest porosity at 30.58%. Hardness testing indicated that Composite NC, containing 10 wt% SiC, achieved the highest hardness of 137 HV. In contrast, Composite ND, with 15 wt% SiC, showed a reduced hardness of 115 HV, attributed to increased porosity and potential SiC particle agglomeration. Wear behavior was evaluated using a pin-on-disc tribometer. Weight loss measurements indicated that Composite A had the lowest weight loss (1.1–2.1 mg), while Composite NB experienced the highest weight loss (2.8–8.3 mg) due to increased porosity. Composite NC demonstrated a balance with moderate weight loss (2.0–3.8 mg). The coefficient of friction (COF) varied with SiC content and applied loads (2, 4, and 8 N), with Composite A demonstrating the lowest COF values (2.3–2.8) and stable performance across different loads. Composite NB exhibited higher COF values (3.5–4) and significant fluctuations due to elevated porosity and the presence of SiC particles. Composite NC showed better wear resistance and more stable COF values (2.5–2.9) compared to NB and ND.

Properties of Nano-Si_3N_4/Bismaleimide/Cyanate Resin Composites

Mechanical and thermal properties of synergistic modification of bismaleimide polymer composites with nano‐SiO2 and hyperbranched polyimide

Study on nano-Si3N4/cyanate ester resin electronic encapsulating material

Improved Microhardness and Microtribological Properties of Bismaleimide Nanocomposites Obtained by Enhancing Interfacial Interaction Through Carbon Nanotube Functionalization

Preparation and Characterization of Bismaleimide-Resin-Based Composite Materials

The Effects of the Variations of Carbon Nanotubes on the Micro-Tribological Behavior of Carbon Nanotubes/Bismaleimide Nanocomposite

Influences of Nano-Si02 on Property of PPO/BCE Composites

Tribological properties of bismaleimide alloy blend with a novel silicon dioxide-containing benzoxazine-monomer

Novel Bismaleimide Resin/Silsesquioxane and Titania Nanocomposites by the Sol-Gel Process: the Preparation, Morphology, Thermal and Thermo-mechanical Properties

N-phenyl Maleimide Grafted MWNT/bismaleimide-allyl Bisphenol A Nanocomposites: Improved MWNT Dispersion, Resin Reactivity and Composite Mechanical Strength

Preparation and Tribological Properties of Bismaleimide Matrix Composites Reinforced with Covalent Organic Framework Coated Graphene Nanosheets

Aminofunctionalization Effect on the Microtribological Behavior of Carbon Nanotube/Bismaleimide Nanocomposites

Improving Tribological Properties of Bismaleimide Nanocomposite Filled with Carbon Nanotubes Treated by Atmospheric Pressure Filamentary Dielectric Barrier Discharge

Tribological properties of bismaleimide reinforced with Si-containing benzoxazine monomer

Preparation and characterization of Si3N4/SBR nanocomposites with high performance

Microstructure, mechanical properties and wear behavior of Mg matrix composites reinforced with Ti and nano SiC particles

Balanced Mechanical and Biotribological Properties of Polymer Composites Reinforced by a 3D Interlocked Si3N4 Nanowire Membrane

Effect of h-BN and Nano-SiO2 Fillers on the High-Temperature Tribological Properties of PEEK/PI-Based Composites

Preparation and characterization of Bismaleimide resin/titania nanocomposites via sol-gel process

Organo-Montmorillonite Modified Bismaleimide as Matrix in Carbon Fibre-Reinforced Composites

Modified Silicon Nitride Nanopowder Coating and Its Influence on the Dynamic Mechanical Property of Polymethyl Methacrylate Nanocomposite