Abstract:When a vehicle is under the idle condition, the direct engine noise and structure-radiated noise caused by engine vibration are perceived by passengers more easily than the vehicle is in moving due to the absence of road and wind noises. These abnormal noises have become the most annoying sound of passenger vehicles. However, there are very few researches on the mechanism of how such noises were generated. In this paper, a passenger vehicle equipped with an inline four-cylinder turbocharged gasoline engine was used to diagnose the abnormal noise under idle condition. The experimental studies with replacement of some engine parts and adjustment of electric control parameters of the valve train showed that the influence of variable camshaft timing (VCT) system on the idling abnormal noise was significant, and increasing the angle of the VCT system of the intake camshaft can greatly reduce the abnormal noise. In order to reveal the mechanism of idling abnormal noise, the oil pressure inside the camshaft phaser of the VCT system was further measured with the vibration and noise signals being simultaneously acquired. The vibration signal characterizing abnormal noise was extracted by the algorithm of dichotomy-based variational mode decomposition. Based on the comprehensive angle domain analyses of the oil pressure of the VCT system, the vibration of the cylinder head and the rotating speed of camshaft and crankshaft, and verification with the experimental data, it was finally concluded that the idling abnormal noise was caused by the impact of the rotor and stator inside the camshaft phaser of the VCT system. The result of this research can also be applied as guideline for diagnosis of other abnormal noises of vehicles.

Identification and Minimization of Whoosh Noise from a Turbo-charged Gasoline Engine

Study on the Identification of Noise Sources and Reducing Noise for Diesel Engine

Simulation and Improvement of Silencer at Turbocharger Outlet

Identification and Evaluation of Diesel Engine Noise Source Based on Acoustic Intensity

Investigation on Main Noise Sources of Vehicle Gasoline Engine by Sound Intensity Measurement

Study of Noise Source Identification and Noise Control of A Gasoline Engine

Noise source identification of internal combustion engine using sound mode technology

Design and Performance Evaluation of Muffler at Turbocharger Inlet

Identification of Combustion Noise and Mechanical Noise in Internal Combustion Engine

Coupled optimization of internal combustion engine radiated noise and interior noise

Application of Two-Chamber Muffler to Reduce Car Noise in Engine Intake System

Analysis on Noise of High Pressure Direct Injection System

Flow Field Simulation and Noise Control of a Twin-Screw Engine-Driven Supercharger

Development and progress in aeroacoustic noise reduction on turbofan aeroengines

Sharpness Simulation and Optimization of a Direct Injection Diesel Engine Noise

Research on Mechanism Diagnosis of an Idling Abnormal Noise of Automobile Engine

Silencer for high-frequency turbocharger compressor noise via an acoustic straightener

Experimental Study on the Mechanism of Engine Combustion and Piston Slapping Noises

Sensitivity analysis and noise reduction optimization design of the insert-pipe double expansion chamber muffler

Experimental and Mechanism Study of Aerodynamic Noise Emission Characteristics from a Turbocharger Compressor of Heavy-Duty Diesel Engine Based on Full Operating Range

Prediction and optimization of aerodynamic noise in an automotive air conditioning centrifugal fan