Abstract:The rod-fastened rotor is comprised of a series of discs damped together by a central tie rod or several tie rods on the pitch circle diameter. The equivalent flexural stiffness of contact interfaces in the rod-fastened rotor is the key concern for accurate rotor dynamic performance analysis. Each contact interface was modeled as a bending spring with stiffness of K-e and a hinge in this study. The contact states of the contact interfaces which depend on the pre-tightening forces and bending moments (static) have effects on K-c. The approach to calculating K-e in two contact states is presented. The first contact state is that the whole zone of the contact interface is in contact, K-e is determined by the contact layer which consists of asperities of the contact surfaces. Hertz contact theory and the GW (Greenwood and Williamson) statistical model are used to calculate the equivalent flexural stiffness of the contact layer Kce. The second contact state is that some zones of the contact interface are separated (when the bending moment is relative large), the equivalent flexural stiffness of the rotor segment Ksf (not include Kc) decreases as the material in the separated zone has no contribution to the bending load carrying capacity of the rotor The strain energy which is calculated by the finite element method (FEM) is used to determine K-sf. The stiffness Ksf is equivalent to the series stiffness of the discs of the rotor segment with flexural stiffness of K-d and a spring with bending stiffness of K-cc in the location of the contact interface, so K-e is equal to the series stiffness of K-ee and K-cf in the second contact state. The results of a simplified rod-fastened rotor indicate that for a flied pre-tightening force, K-ee decreases with bending moments in the first contact state whereas increases with bending moments in the second contact state. In addition, K-c and K-c decreases abruptly with the increase of bending moments in the second contact state when the rotor is subjected to a relatively large pre-tightening force. Finally, the multipoint exciting method was used to measure the modal parameters of the experimental rod-fastened rotor It is found that the experimental modal frequencies decrease as the pre-tightening force decreases.

Analysis of Rotor Contact Stiffness Based on Persson's Contact Theory

Effects Of Bending Moments And Pre-Tightening Forces On The Flexural Stiffness Of Contact Interfaces In Rod-Fastened Rotors

Normal Fractal Contact Stiffness Model among Three Disks of Rod-Fastening Rotor System with Considering Friction and the Asperities Interaction

Establishment of a contact stiffness matrix and its effect on the dynamic behavior of rod-fastening rotor bearing system

Modal Analysis for a Rod-Fastened Rotor Considering Contact Effect Based on Double Fractal Model

New Analysis Model for Rotor-Bearing Systems Based on Plate Theory

Dynamic characteristics of a rod fastening rotor for gas turbine considering contact stiffness

Rotor Dynamic Analysis of Tie-Bolt Fastened Rotor Based on Elastic-Plastic Contact

Dynamic Modeling and Analysis of Distributed Rod Fastening Rotor

Numerical and Experimental Study on Rod-Fastened Rotor Dynamics Using Semi-Analytical Elastic-Plastic Model

A Simple Contact Model for Simulating Tie Bolt Rotor Butt Joints With and Without Pilot Fits

Dynamic Analysis of the Rod-Fastened Rotor Considering the Characteristics of Circumferential Tie Rods

Measurement and Modeling of Normal Contact Stiffness and Contact Damping at the Meso Scale

Dynamical Analysis On Circumferential Rod Fastening Rotor System In Heavy-Duty Gas Turbine

Methods for Modeling Stiffness and Model Updating for the Rod-fastened Rotor of Gas Turbine

Effect of Contact Interface Upon Nonlinear Dynamic Properties of a Flexible Rod Fastening Rotor Bearing System

Dynamic Analysis And Optimization On Assembly Parameters Of Rod Fastening Rotor System With Manufacturing Tolerances

Investigation on Stiffness of Circumferential Distributed Tie-Rod Rotor with Curvic Couplings of Trochal Disk

Rub-impact Behavior Study of a Flywheel Rotor by Considering the Friction Coefficients Effect

Investigation of Contact Stiffness and its Relation to Friction-Induced Noise and Vibration

Determination of Contact Stiffness and Damping of a Tie-Bolt Rotor with Interference Fits Using Model Updating with Thin-Layer Elements