Abstract:Purpose This study aimed to solve the engineering problem of free vibration disturbance and local mesh refinement induced by microcrack damage in circularly curved beams. The accurate identification of the crack damage depth, number and location depends on high-precision frequency and vibration mode solutions; therefore, it is critical to obtain these reliable solutions. The high-precision finite element method for the free vibration of cracked beams needs to be developed to grasp and control error information in the conventional solutions and the non-uniform mesh generation near the cracks. Moreover, the influence of multi-crack damage on the natural frequency and vibration mode of a circularly curved beam needs to be detected. Design/methodology/approach A scheme for cross-sectional damage defects in a circularly curved beam was established to simulate the depth, location and the number of multiple cracks by implementing cross-section reduction induced by microcrack damage. In addition, the h-version finite element mesh adaptive analysis method of the Timoshenko beam was developed. The superconvergent solution of the vibration mode of the cracked curved beam was obtained using the superconvergent patch recovery displacement method to determine the finite element solution. The superconvergent solution of the frequency was obtained by computing the Rayleigh quotient. The superconvergent solution of the eigenfunction was used to estimate the error of the finite element solution in the energy norm. The mesh was then subdivided to generate an improved mesh based on the error. Accordingly, the final optimised meshes and high-precision solution of natural frequency and mode shape satisfying the preset error tolerance can be obtained. Lastly, the disturbance behaviour of multi-crack damage on the vibration mode of a circularly curved beam was also studied. Findings Numerical results of the free vibration and damage disturbance of cracked curved beams with cracks were obtained. The influences of crack damage depth, crack damage number and crack damage distribution on the natural frequency and mode of vibration of a circularly curved beam were quantitatively analysed. Numerical examples indicate that the vibration mode and frequency of the beam would be disturbed in the region close to the crack damage, and a greater crack depth translates to a larger frequency change. For multi-crack beams, the number and distribution of cracks also affect the vibration mode and natural frequency. The adaptive method can use a relatively dense mesh near the crack to adapt to the change in the vibration mode near the crack, thus verifying the efficacy, accuracy and reliability of the method. Originality/value The proposed combination of methodologies provides an extremely robust approach for free vibration of beams with cracks. The non-uniform mesh refinement in the adaptive method can adapt to changes in the vibration mode caused by crack damage. Moreover, the proposed method can adaptively divide a relatively fine mesh at the crack, which is applied to investigating free vibration under various curved beam angles and crack damage distribution conditions. The proposed method can be extended to crack damage detection of 2D plate and shell structures and three-dimensional structures with cracks.

Damage Detection for Cracked Beams by Using Auxiliary Mass Approach Combined with Fractal Dimension Method

Automated Finite Element Modeling and Analysis of Cracked Reinforced Concrete Beams from Three Dimensional Point Cloud

Applying Bandgap Defect Modes to Crack Detection in Beams Using Periodic Concentrated Masses

Damage Detection Method in Complicated Beams with Varying Flexural Stiffness

Experimental Study of Structural Damage Identification Based on Modal Parameters and Decay Ratio of Acceleration Signals

Damage detection based on accelerometers and computer vision measurements of moving load-induced structural responses

Crack Detection of Beam-Structures Based on Transient Waves

Adaptive Finite Element Analysis for Damage Detection of Non-Uniform Euler–Bernoulli Beams with Multiple Cracks Based on Natural Frequencies

Damage Assessment Using The Energy Dissipation Ratio Of Acceleration Signals

Damage detection of cracked beams based on wavelet transform

Damage detection in a fixed-fixed beam using natural frequency changes

Vibration-Based Crack Identification of Generally Supported Beam Structures

Vibration-Based Damage Detection Of Cable-Stayed Bridges

Damage detection method for structures based on the relative variation of wavelet total energy

A New Method of Obtaining Modal Sensitivity for Damage Location in Beam Structure

Cracking Behavior of Cfrp Laminate-Strengthened Rc Beams with Premechanical and Postmechanical Environmental Damage

Numerical Research on Damage Detection of Simple Supported Beam Based on the Natural Frequency Vector Method

Use of Bispectrum Analysis to Inspect the Non-Linear Dynamic Characteristics of Beam-Type Structures Containing a Breathing Crack

Structural damage identification using system dynamic properties

Damage Detection of Beams Based on Experimental Wavelet Analysis of Flexible Waves

Free vibration disturbance and local mesh refinement induced by microcrack damage in circularly curved beams