Abstract:In order to study the effect of microcrystalline cellulose on the reaction kinetics of polyurethane, in this work, the multi-scale microcrystalline cellulose was added to the foaming system of multifunctional polyether and multifunctional MDI polyurethane. While the chemical reaction was carried out, it was found through in situ FTIR combined with in situ rheological analysis that what was different from the usual inorganic fillers, the hydroxyl on the surface of the microcrystalline cellulose could preferentially react with MDI to generate urethane under the action of the catalyst. In the initial 5–6 min of the reaction, the reaction of soft segment chain growth was the main reaction. Then the main reaction quickly converted to the cross-linking reaction, which greatly increased the viscosity of the system. The addition of microcrystalline celluloses accelerated the improvement of the cross-linking degree and viscosity of the system. The higher the surface hydroxyl content of microcrystalline cellulose, the more significant this trend become. In addition, although the amount of microcrystalline cellulose added was different, the ratio of the reaction rate of the isocyanate group with the hydroxyl group and the amine group eventually tended to be constant, which indicated that there was a stable reactivity rate in the gradual addition reaction during the cross-linking reaction. Combined with SEM analysis, it was found that 25–60 μm microcrystalline cellulose with large hydroxyl content could act as a nucleating agent when the addition amount was less than 0.1%, which was beneficial to increase the cell density and reduce the pore size and improved the impact performance of the foam. The microcrystalline cellulose with a length of more than 90 μm continuously penetrated through several cell walls and destroyed integrity of the cell structure, which would consequently reduce the impact strength of the foam. This paper provided theoretical guidance for polyurethane modified by microcrystalline cellulose.

Effect of polyurethane-processing on the properties of foam cement

Effect of Surface Modification of Montmorillonite on the Properties of Rigid Polyurethane Foam Composites

Effect of Surface Modifications of Carbon Black (CB) on the Properties of CB/polyurethane Foams

Mechanical Properties of Polyurethane Foams Prepared from Liquefied Corn Stover with PAPI.

Effect of polyethylene powder and heating treatment on the microstructure and hardened properties of foam concrete

Study on Property of Polyurethane Foam Materials

Microstructure and performances of rigid polyurethane foam prepared using double‐effect baking powder as a foaming agent

Effect of Microcrystalline Cellulose on the Preparation and Performance of Rigid Polyurethane Foam

Effect of formulation and processing technology on properties of moulded EPDM foam

Developments of Sound Absorption of Fine Performance Polyurethane-based Porous Composite Materials

Effect of Fiber Content on Sound Absorption, Thermal Conductivity, and Compression Strength of Straw Fiber-filled Rigid Polyurethane Foams

Enhanced Mechanical and Thermal Properties of Polyurethane‐imide Foams with the Addition of Expended Vermiculite

Effects of high functionality polyol on the structure and properties of rigid polyurethane foam

Effects of Mixing Techniques and Material Compositions on the Compressive Strength and Thermal Conductivity of Ultra-Lightweight Foam Concrete

Durability enhancement of cement-based repair mortars through waterborne polyurethane modification: Experimental characterization and molecular dynamics simulations

Effect of Water-Cement Ratio on Pore Structure and Strength of Foam Concrete

Effect of hollow glass microsphere on combustion behavior and mechanical properties of polyurethane foam

Water absorption of polyurethane foam reinforced with bio-fillers

Study on preparation and thermal insulation properties of curing foam

Preparation and Properties of Water-blown Polyurethane Rigid Foam with Flame Retardants

Investigation on the influence of waste-based fillers on the mechanical and thermal characteristics of rigid polyurethane foams