Abstract:Based on the cyclic tension-unloading tests with various displacements (40, 60 and 80 mm) and at different loading rates (0.3 mm/s, 1 mm/s and 5 mm/s), the thermo-mechanically coupled deformation and temperature evolution of pseudoelastic NiTi shape memory alloy (SMA) helical spring are investigated. Experimental results reveal that the phase transition between austenite (A) and martensite (M) phases undergoes a two-step process involving an intermediate phase, that is, rhombohedral (R) phase; the force-displacement responses of the spring depend on the loading rate strongly, which originates from Clausius-Clapeyron relation between the critical stresses of phase transitions (including R and M transformations), and the competition between the internal heat generation and heat exchange. Then, a three-dimensional phenomenological constitutive model is developed by addressing three possible phase transition processes (that is, A→R→M, A→mixed A + R→M and A→M) and thermo-mechanical coupling effect. Generalized thermodynamic forces for the phase transitions and the evolution equation of temperature are derived based on the second and first laws of thermodynamics, respectively. To accurately describe the loading amplitude-dependent dissipation and hardening behavior of MT, new dissipation and hardening laws are proposed. Furthermore, a new analytical model of helical spring is developed by simultaneously considering the torsion and bending deformation modes, curvature effect and the coupling effect between the deformation and temperature evolution. Finally, the developed model is validated by comparing the simulated results with the experimental data, and the influences of geometrical parameters and ambient temperature on the thermo-mechanical responses of the spring are also predicted and discussed.

Experimental study on hysteretic performance of superelastic TiNi shape memory alloy helical springs

Modelling and Experimental Study of Shape Memory Alloys Coil Spring Actuator

Functional fatigue of superelasticity and elastocaloric effect for NiTi springs

Experimental Study of One‐dimensional Superelastic Capability of a Nearly Equi‐atomic NiTi Shape Memory Alloy

Thermo-mechanically coupled deformation of pseudoelastic NiTi SMA helical spring

Superelastic and Cyclic Response of Nitisma at Various Strain Rates and Temperatures

Experimental Study of Superelasticity of Ni-Ti Shape Memory Alloy Wires

DYNAMICAL BEHAVIOR AND CONSTITUTIVE MODEL OF SUPERELASTICITY NITI SHAPE MEMORY ALLOY WIRE : EXPERIMENT AND THEORY

Numerical Simulation and Experimental Study of a Simplified Force-Displacement Relationship in Superelastic SMA Helical Springs

Effect of Spring Index on the Energy Absorption Capacity of Nitinol Springs

Mechanical behavior tests of NiTi wires with different diameters for structural vibration control

Study of Two-Way Shape Memory Extension Spring of Narrow Hysteresis Tinicu Shape Memory Alloys

Study of Recovery Characteristic in TiNiFe Low-temperature Shape Memory Alloy Springs

Experimental and Numerical Study of the Superelastic Behaviour on NiTi Thin-Walled Tube under Biaxial Loading

Experimental study on mechanical properties of large NiTi superelastic shape memory alloy bars

Actuation performance of machined helical springs from NiTi shape memory alloy

An Experimental Study of the Superelastic Behavior in NiTi Shape Memory Alloys under Biaxial Proportional and Non-Proportional Cyclic Loadings

Experimental study on performance of Ti-Ni shape memory alloy composite suspension damping system

Molecular dynamics simulations of ultralow hysteretic behavior in super-elastic shape memory alloys

Modeling and Experimental Validation of the Hysteretic Dynamics of Shape Memory Alloy Springs

Two-Way Shape Memory Effect of Tini Alloy Coil Extension Springs