Abstract:This paper studies the hydrodynamic performance of vertical cylindrical absorbers in front of a vertical wall. All the absorbers are independent of each other and restricted to only the heave motion. Based on a linear potential flow theory, an analytical solution is developed for the problems of wave diffraction and radiation by absorbers. In the solving procedure, the hydrodynamic problem is first transformed into an equivalent problem in an open water domain using the image principle. The number of absorbers in the equivalent problem is twice that in the real problem, and the plane layout is symmetric about the original vertical wall. The velocity potential of the fluid domain is obtained using the method of variable separation, and the unknown expansion coefficients in the velocity potential are determined by the matched boundary conditions. The heave excitation force, added mass, radiation damping, motion response, and energy capture width of the absorbers are calculated. Case studies are presented to show the effects of the wall reflection and hydrodynamic interaction on the energy extraction performance of the wave energy converter (WEC) system. Subsequently, the WEC performance under the action of irregular waves is analyzed by considering an incident wave spectrum, and the mean annual absorbed power of the device is estimated by considering the wave data statistics at the actual sites. The results indicate that when the wave motion resonates with the absorber motion, the energy extraction performance of the absorbers is significantly improved. The performance of the absorbers can be effectively improved when the structures are close to the antinodes of a standing wave field. By designing a reasonable plane layout, the hydrodynamic interaction can play a constructive role in the performance of the WEC system.

The Analysis of Absorber's Boundary Condition

Theoretical Analysis on the Absorbing Structures Under Open Boundary Condition

The Use of Absorbing Boundary Conditions in the Method of Lines

Analysis of acoustic radiation problems involving arbitrary immersed media interfaces by the extended finite element method with Dirichlet to Neumann boundary condition

Analysis of the sound field above finite absorbers in the wave-number domain

Study of thin panel with fluid loaded absorbers

Thermal Release Mechanisms of a Typical Absorber at the Synchrotron Radiation Front-End Based on Finite Element Analysis

General Absorbing Boundary Conditions for Dynamic Analysis of Fluid-Saturated Porous Media

Study of the Absorption Characteristics of Alberich Anechoic Coating Based on the Finite Element Method

Acoustic Characteristics of Micro-perforated Panel Acoustic Absorbers with Variable Cavity Depth

Analysis of Liquid Inclination on the Absorption Performance of the Cavity-containing Coating

STUDY ON HEAT AND MASS TRANSFER OF AN AIR COOLED VERTICAL FALLING LIQUID FILM ABSORPTION

Study of Hyperbolic Heat Conduction Problem in the Film and Substrate Composite with the Interface Resistance

Structural–acoustic Sensitivity Analysis of Radiated Sound Power Using a Finite Element/ Discontinuous Fast Multipole Boundary Element Scheme

Transient Temperature Analysis and Computation in a 2-Layer Rectangular Absorbing Medium with a Semitransparent Diffuse Interface and Black Surfaces

Treatment of boundary conditions by finite difference time domain method

Thermal boundary conditions for heat transfer analysis of bridges considering non-uniform distribution of internal air temperature by computational fluid dynamics

Hydrodynamic performance of vertical cylindrical wave energy absorbers in front of a vertical wall

Study on the Calculation of the Acoustical Transfer Property of Exhaust Muffler

Analysis of a time-dependent fluid-solid interaction problem above a local rough surface

Analyzing the impact of flexible shells and sound absorbent lining on acoustic wave behavior in ducts