Abstract:High-energy colliders play an indispensable role in particle physics and high-energy physics. Beam screen is one of the key parts in the high-energy collider. It is used to transfer the heat generated by the beam in the pipeline to a cooling system, and absorb the residual gas to the cold bore through the pumping holes on the wall of the beam screen to ensure the vacuum stability at the same time. However, in the process of transferring thermal load, the deformation caused by temperature change will affect the structural stability of the beam screen. How to reduce the deformation as much as possible while ensuring the good heat transfer performance of the beam screen is one of the key issues in optimizing the structural design of the beam screen. In this paper, the heat transfer performance and mechanical property of the beam screen model are simulated and optimized based on the ANSYS simulation results to ensure the normal and stable operation of the beam in the super proton-proton collider. For the inner surface of the outer screen of the beam screen, the method of reducing the thickness of the copper coating is used to reduce the Lorentz force generated during operation. The calculation results from the relevant theoretical models show that when the thickness of the copper coating varies from 0 to 100 μm, the copper coating with a thickness of 75 μm can reduce the maximum deformation of the outer screen of the beam screen by 70.9%, while the maximum temperature of the beam screen can be increased by 1.1%. For the inner screen of the beam screen, a design scheme in which supporting ribs are arranged at intervals is used to reinforce the structure and improve the overall structural stability of the beam screen. The calculation results show that the maximum deformation of the inner screen of the beam screen can be reduced by 86.8% and the maximum temperature of the beam screen is reduced by 7.69%, compared with the case without supporting fins, when the interval between two adjacent supporting fins is 1 pumping hole. The research results provide important theoretical reference for the design of beam screen, which is the key component of the vacuum system of the new-generation high energy particle accelerator.

Thermal Release Mechanisms of a Typical Absorber at the Synchrotron Radiation Front-End Based on Finite Element Analysis

Structure design and thermal stress analysis of photo shutter on SSRF front end

An Efficient 3D Tube-Level Flux-Thermal Model of External Tubular Receivers in Solar Power Tower Systems

A Mini-Review on the Thermal Fatigue Properties of Copper Materials Applied at the Front-End of Synchrotron Radiation Facilities

Application of CAE in light-blocked component design for synchrotron radiation facility

Structure and Thermal Analysis of the Water Cooling Mask at NSRL Front End

Thermal fatigue life of Glidcop Al-15 high-heat-load components

Fatigue Life Prediction Strategies for High-Heat-Load Components

Heat Transfer Simulation and Analysis of Electron Collector Based on Real-time Uniformity Detection Device of Irradiation Accelerator

Effects of Design Parameter Changes on the Fatigue Life of Light-Blocked Component

Thermal Management by Manipulating Electromagnetic Parameters

The Analysis of Absorber's Boundary Condition

Theoretical Simulation of Thermal Behavior in Transient Heat Loads Testing of Plasma-Facing Materials

A Simplified and Cost-Effective Optical Absorber and Corresponding Photo-Thermal Effect

Thermal analysis and cooling structure design of the primary collimator in CSNS/RCS

Pore-scale evaluation on a volumetric solar receiver with different optical property control strategies

Heat Transfer Analysis of the Bent Cooling Channels in SSRF Light-Blocked Components

Performance Analysis on a Volumetric Solar Receiver with an Annular Inner Window

Thermal-structural Coupling Analysis of Beam Screen in Super Proton-Proton Collider

Design of near-ideal and omnidirectional selective solar absorber for high-temperature applications

Homogenization of solar flux distribution in a carbon aerosol entrapped cavity receiver