Abstract:The evolution of surface morphologies of films prepared by ion-based deposition techniques has been investigated by atomic force microscopy. Two deposition processes, filtered arc deposition (FAD) and ion-beam-assisted deposition, where low-energy (<100 eV) ion irradiation and high-energy (several tens of keV) ion-beam bombardment concurrent with film growth were involved, respectively, have been employed to prepare TiN and Al films. Comparative studies on the effect of energetic ions on the development of topography have been performed between the low-ion-energy regime and high-ion-energy regime. In addition, the relationship between topography and mechanical properties of thin films has been revealed, by involving thin films prepared by thermal evaporation deposition (TED), where almost all depositing particles are neutral. In the images of the TED TiN and Al films, a large number of porous and deep boundaries between columnar grains was observed, suggesting a very rough and loose surface. In contrast, the FAD films exhibited much denser surface morphologies, although still columnar. The root-mean-square roughness of the FAD films was less than 1 Å. Hardness test and optical parameter measurement indicated that the FAD films were much harder and, in the case of optical films, much more transparent than the TED films, which was considered to arise from the denser surface morphologies rather than crystallization of the films. The high density and super smoothness of the FAD films, and the resultant mechanical and optical properties superior to those of the TED films, were attributed to the enhancement of surface migration of the deposited adatoms in the FAD process, which could provide intensive low-energy ion irradiation during film growth. As for topography modification by high-energy ion-beam bombardment concurrent with film growth, in addition to the increase of surface diffusion due to elastic collision and thermal spikes, physical sputtering must be considered while explaining the development of the film topography. Both surface migration enhancement and sputtering played important roles in the case of high-energy heavy-ion-beam bombardment, under which condition surface morphology characterized by dense columns with larger dimension and deep clean boundaries was formed. However, under high-energy light-ion-beam bombardment, the sputtering was dominant, and the variation of sputtering coefficient with position on the surface of growing film led to the formation of cones.

Nano-indentation of Molecular Deposition Film

Nanomechanical Properties of Molecular Deposition Film

In Situ Nanoindentation Mechanical Property of Films by Atomic Force Microscope

Numerical studies on deformation and adhesion behaviour of substrate during nanoindentation

Atomic Force Microscopy Study on Topography of Films Produced by Ion-Based Techniques

Computer Simulations on Mechanical Properties of Molecular Deposition Film

Nano-fabrication System Based on Atomic Force Microscopy

Influence of Post-Annealing Treatment on the Morphology of Au Films Deposited on Liquid Surfaces

Nano-level Indentation Hardness Test of PMMS Film with AFM

Measuring elastoplastic properties of thin films on an elastic substrate using sharp indentation

Simulations on nanotribological properties of molecular deposition films

Direct Measurement of Plowing Friction and Wear of a Polymer Thin Film Using the Atomic Force Microscope

Nano-Indentation for Characterizing Mechanical Properties of Soft Materials

Nanoindentation study of Ni45Nb55 amorphous films prepared by ion beam assisted deposition

Analysis of deformation behaviour of Al–Ni–Co thin film coated aluminium during nano-indentation: a molecular dynamics study

Effect of Surface Roughness on Nanoindentation Test of Thin Films

Molecular Dynamics Simulation of Nanoindentation of Cu/Au Thin Films at Different Temperatures

Mechanical properties evaluation of diamond films via nanoindentation

Thickness Mediated Morphology Evolution in Sub-10-nm Metal Film Deposition: Implications for Nondestructive Testing

Size dependent mechanical properties and deformation mechanisms in Ti and Zr films

AFM for Nanomechanical Assessment of Polymer Overcoatings on Nanoparticle-Decorated Biomaterials