Abstract:Time measurement plays a crucial role for the purpose of particle identification in high energy physics experiments. With increasingly demanding physics goals and the development of electronics, modern time measurement systems need to meet the requirement of excellent resolution specification as well as high integrity. Based on Field Programmable Gate Arrays (FPGAs), FPGA time-to-digital converters (TDCs) have become one of the most mature and prominent time measurement methods in recent years. For correcting the time-walk effect caused by leading timing, a time-over-threshold (TOT) measurement should be added to the FPGA TDC. TOT can be obtained by measuring the interval between the signal leading and trailing edges. Unfortunately, a traditional TDC can recognize only one kind of signal edge, the leading or the trailing. Generally, to measure the interval, two TDC channels need to be used at the same time, one for leading, the other for trailing. However, this method unavoidably increases the amount of FPGA resources used and reduces the TDC's integrity. This paper presents one method of TOT measurement implemented in a Xilinx Virtex-5 FPGA. In this method, TOT measurement can be achieved using only one TDC input channel. The consumed resources and time resolution can both be guaranteed. Testing shows that this TDC can achieve resolution better than 15ps for leading edge measurement and 37 ps for TOT measurement. Furthermore, the TDC measurement dead time is about two clock cycles, which makes it good for applications with higher physics event rates.

Time Measurement Circuit System Design

Design of Multifunction Digital Clock Based on FPGA

A High-Resolution TDC Design Based on Multistep Fine Time Measurement by Utilizing Delay-Adjustable Looped Carry Chains on FPGAs

Low-cost FPGA-based multi-channel TDC with high resolution and density for time-of-flight detectors

High-Resolution, Multi-Channel FPGA-Based Time-to-Digital Converter

A Low-Cost FPGA-Based Coarse-Fine Counting Time-to-Digital Converter With External High-Precision Reference Clock

Design and Implementation of a Time to Digital Convertor (TDC) Circuit Based on FPGA in Positioning Technology

Carry chain based multi-channel time-to-digital converter

TOT measurement implemented in FPGA TDC

Design and Implementation of High-Precision Timing Module for NR Terminals Based on FPGA

Design of high precision frequency meter with FPGA

A Design of High Resolution One-Clock-Cycle TDC Based on FPGA

A High-Throughput Vernier Time-to-Digital Converter on FPGAs with Improved Resolution Using a Bi-Time Interpolation Scheme

Design of a high-precision time-to-digital converter in an Elitestek Ti60 field-programmable-gate-array

A 3.9-ps RMS Precision Time-to-Digital Converter Using Ones-Counter Encoding Scheme in a Kintex-7 FPGA

A High Resolution Time-to-digital-convertor Based on a Carry-Chain and DSP48E1 Adders in a 28-Nm Field-Programmable-gate-array

New High-Rate Timestamp Management with Real-Time Configurable Virtual Delay and Dead Time for FPGA-Based Time-to-Digital Converters

Hardware-based Solution of Precise Time Synchronization for Networked Control System

A 19.6 ps, FPGA-Based TDC With Multiple Channels for Open Source Applications

FPGA Vernier Digital-to-Time Converter With 1.58 ps Resolution and 59.3 Minutes Operation Range

A High-Resolution Tdc Implemented In A 90nm Process Fpga