Deformation Monitoring Method of the Buildings in Mining Area Based on 3D Laser Scanning Technique

Jiao Xiaoshuang,Hu Haifeng,Lian Xugang

DOI: https://doi.org/10.19614/j.cnki.jsks.201804026

2018-01-01

Abstract:The traditional deformation monitoring methods have some defects such as heavy workload,hard to protect the monitoring points and longtime monitoring,etc..Compared with the traditional monitoring methods,3D laser scanning technique is characterized by non-contact,high density,high precision,large amount of information,fast acquisition of 3D coordinate and so on.Based on the similar material model test,the deformation monitoring flow of the buildings in mining area is proposed by adopting 3D laser scanning technique.Firstly,the 2D similar material model is scanned by using full-station 3D laser scanner in five different mining periods,the point clouds data is pre-processed by using the post-processing software,so as to extract the 3D coordinates of the targets with black and white colors(deformation monitoring points);then,through programming by MAT-LAB language,the automatic conversion of monitoring points from assumed coordinated to target coordinate is realized,so as to improve the processing efficiency of point clouds data;finally,according to the deformation monitoring flow summarized from the above similar material model test,the deformation monitoring work of the water tower of a mining area is done.The study results show that:the maximum error of the deformation monitoring data obtained by 3D laser scanning technique and total station in-strument is 1.8 mm,which is lower than the allowable precision(10 mm) of deformation monitoring.Therefore,it is feasible to use 3D laser scanning technique to monitor the deformation information of the buildings in mining area.