Abstract:Manganese-rich slag is a raw material for smelting silicon–manganese alloys using an electric furnace. The blast furnace method is the main method for smelting manganese-rich slag. This method has the problems of a long process, large coke consumption, and easy volatilization of metals such as lead and zinc, which affects smelting safety. A new technology for smelting manganese-rich slag with low-manganese high-iron ore by smelting reduction optimization was proposed. This technology has the advantages of a short process, low energy consumption, low carbon emissions, and comprehensive recycling of lead, zinc, and other metals. According to the chemical composition, X-ray diffraction analysis, and particle size analysis of Cote d’Ivoire low-manganese ore, an experiment was carried out on manganese-rich slag by reduction–smelting separation. Combined with the design scheme of the Box–Behnken principle, three experimental factors (temperature, basicity, and carbon content) were selected as the influences to study. The influence that each factor has on the recovery rate of manganese was studied by response surface methodology, and the experimental factors were optimized. The results show that under the conditions of a reduction-smelting temperature of 1402 °C, basicity of R = 0.10, and carbon content of 10 mass%, the recovery rate of manganese is 97%. A verification experiment was carried out under the optimal conditions, and the error was only 1.24%; this proves that the response surface method prediction model is reliable and accurate. This is of great significance for the comprehensive utilization of lean-manganese ore resources.

Investigation on Melting Reduction-separation of Iron and Manganese on High-iron Manganese Ore

An efficient and green method to separate iron and manganese from ferromanganese ore by suspension magnetization roasting and magnetic separation

Green and Efficient Utilization of Ferruginous Gibbsite Ore and Ferruginous Manganese Ore by Synergetic Carbothermic Co-Reduction–Magnetic Separation Process

Separation of Manganese and Iron for Low-Grade Ferromanganese Ore Via Fluidization Magnetization Roasting and Magnetic Separation Technology

Separation and Recovery of Iron and Nickel from Low-Grade Laterite Nickel Ore by Microwave Carbothermic Reduction Roasting

Individual enrichment of manganese and iron from complex refractory ferromanganese ore by suspension magnetization roasting and magnetic separation

An Innovative Technology for Full Component Recovery of Iron and Manganese from Low Grade Iron-Bearing Manganese Ore

Direct Reduction of Mixtures of Manganese Ore and Iron Ore

Experiments on the Coal-based Direct Reduction-Magnetic Separation of a Refractory Iron Ore

Enrichment and Recovery Fe-containing Phases from High Iron Gibbsite Ore Based on Metallized Reduction and Magnetic Separation

An Innovative Technique for Comprehensive Utilization of High Aluminum Iron Ore via Pre-Reduced-Smelting Separation-Alkaline Leaching Process: Part I: Pre-Reduced-Smelting Separation to Recover Iron

Separation of Ferromanganese Ore Components by Reduction with Carbon and Carbon Monoxide

Study on Iron Extraction from High Iron Bauxite Residue by Pyrite Reduction

Investigation of the smelting reduction mechanism and of iron extraction from high-iron red mud

Experimental Investigation on Direct Reduction Followed by Magnetic Separation for Nb2O5-Bearing Ore

Characterization and Reduction Roasting Studies of an Iron Rich Manganese Ore

Experimental Research on Rducting Roasting and Low Intensity Magnetic Separation of a Refractory High Al-Si Iron Ore

Experiments on Segregation Technological Conditions of Iron Increase and Dephosphorization from High-Phosphorus Hematite-Limonite Ore

Manganese and Aluminium Recovery from Ferromanganese Slag and Al White Dross by a High Temperature Smelting-Reduction Process

A Study of Processing High-Grade Magnetite Concentrates by Combination of Magnetic Separation and Reverse Flotation Separation to Prepare Raw Materials for Ferrite Magnet

Optimization of manganese-rich slag extraction from low-manganese ore smelting by response surface methodology