Numerical Simulation of Particle Motion Trajectory in Lifting Pump for Deep-sea Mining

Shu-qi YU,Rong-chang LUO,Bin CAO,Jian-xin XIA

DOI: https://doi.org/10.3969/j.issn.0253-6099.2018.01.008

2018-01-01

Abstract:Aiming at the blockage and wear-off of lifting pump in deep-sea mining transportation system,the fluid field of the lifting pump was solved by the standard κ-ε turbulence model and the particle flow trajectories was simulated with a discrete phase model,and effects of particle diameter, guide vane inlet-stagger-angle and number of guide vanes on the blockage and wear characteristics of lifting pump were investigated. Results showed particles generally collided most frequently with the front cover plate in the first partition of the guide vane,leading to a serious abrasion in this area,and also frequently with the pressure face in the third and fourth partition of guide vane. The collision between particles and guide vane predominantly changed particles trajectory and led to less abrasion on the pressure face of guide vane. With an increase in particle size,both the average time for particles passing through the guide vane and numbers of collision with guide vane were on the rise,which increased the possibility of particles colliding with the suction surface. With the increasing of guide vane inlet-stagger-angle, an average time for particles passing through vanes and average collision numbers were all increased. It is found that the collision of particles with pressure face that is closer to the inlet of the guide vane blade,will lead to more serious abrasion of the inlet of pressure face. With an increase in the guide vane numbers,the time for passing through the vane was shortening. And with the collision of particles with the pressure face of guide vane moving to the center part,the pressure face became less worn off.