Abstract:Spherical-like morphology orthorhombic LiMnO2 (So-LiMnO2) powders were prepared using spherical-like MnCO3 precursors, which were obtained by a carbonate co-precipitation method. The materials were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and Brunauer–Emmett–Teller (BET) method. Non-spherical orthorhombic LiMnO2 (No-LiMnO2) powders were also studied and compared with the above-mentioned So-LiMnO2. The results show that the microstructure of o-LiMnO2 depends significantly on that of the precursors. The obtained So-LiMnO2 has a poor crystalline structure, more stacking faults and small crystallites that have morphology similar to that of powders consisting of larger particles. Benefiting from its unique microstructure, the So-LiMnO2 cathode exhibits a higher maximum capacity and better capacity retention compared to that of No-LiMnO2. The analyses performed with a transmission electron microscopy (TEM) and an energy dispersive spectroscopy (EDS), confirmed that So-LiMnO2 particle, formed by the agglomeration of primary particles, can reduce the erosion of positive material by electrolytes and the dissolution of manganese, which results in the enhanced electrochemical cycleability.

Preparation of Nano-LiMn2O4

Preparation of Submicrocrystal LiMn2O4 Used Mn3O4 As Precursor and Its Electrochemical Performance for Lithium Ion Battery

Preparation of Nanocrystalline LiMn1.90Cr0.05Ni0.05O4

Preparation of Spinel LiMn2O4 from Manganese Oxide and Its Electrochemical Performance

Preparation of LiMn_2O_4 for lithium ion batteries by sol-gel method

Preparation Of Nanocompound Oxide Limn2o4 And Characterization Of Its Electrochemical Properties

Synthesis and Electrochemical Properties of Nanostructured LiMn2O4 for Lithium-Ion Batteries

Electrochemical performance of LiMn2O4 synthesized from precursor Mn3O4

Microstructure and Electrochemical Characterization of Spherical-Like Orthorhombic LiMnO2 Via Co-Precipitation

Preparation and Characterization of MnFe2O4 by a Microwave-Assisted Oxidative Roasting Process

Preparation and Lithium Adsorption Properties of Low-Dimensional Cubic Li4mn5o12 Nanostructure

Preparation of Cathode Materials for Lithium Batteries by Melt Impregnation Method .1. Preparation of Spinel Limn2o(4)

Synthesis, Electrochemical, and Microstructural Study of Precursor-Derived LiMn2O4 Powders

Synthesis and Electrochemical Characterizations of Spinel LiMn2O4 by Citric Acid-Assisted Sol-Gel Method

Novel Synthesis Process and Structural Characterization of Li–Mn–O Spinels

Citric Acid-Assisted Sol–gel Synthesis of Nanocrystalline LiMn2O4 Spinel As Cathode Material

Studies on LiMnO spinel system (obtained from melt-impregnation method) as a cathode for 4 V lithium batteries Part II. Optimum spinel from γ-MnOOH

Direct Hydrothermal Synthesis of LiMn 2 O 4 Spinel and Lithium Ion Selective Adsorption

Preparation of Spinel LiMn_2O_4 Cathode Materials for Li-ion Batteries Based on Sol-gel Process

Preparation and electrochemical properties of cathode materials Li1+xMn2O4 for lithium ion batteries

Preparation of Α-Mn2o3 and MnO from Thermal Decomposition of MnCO3 and Control of Morphology