Abstract:Mg-rare earth (RE) alloy, i.e. , Mg-1Zn-1Gd (ZG11), was treated by a conventional pulse anodization process. The effect of electrical parameters (processing time, duty cycle and applied current) on the microstructure and corrosion resistance of anodized film was investigated by orthogonal method. SEM and XRD were used to characterize the microstructures and compositions of anodized films. Polarization curve, electrochemical impedance spectroscopy (EIS) and scanning electrochemical microscopy (SECM) were performed to evaluate the corrosion resistances of anodized samples. The results show that with the employment of appropriate electrical parameters, corrosion resistance of ZG11 alloy can be significantly enhanced ( i corr decreases by nearly three orders of magnitude) after anodized for less than 2 min. Besides, the optimal sample selected from orthogonal experiments in terms of the thickness and porosity of anodized film appropriately matches with the sample with the best corrosion resistance determined by electrochemical corrosion measurements, indicating the strong relationship between the thickness and porosity of anodized film and its corrosion resistance. Additionally, results of cell proliferation tests demonstrate that the varied surface morphologies and microstructure characteristics of the anodized samples in the present study do not necessarily influence the related cytocompatibilities. The study helps to further understand the effect orders of different current parameters on the structure and properties of anodized film and therefore provides a high-efficiency and low-energy consumption way to manufacture Mg alloys with excellent corrosion resistances.

STUDY ON CORROSION RESISTANCE OF ORTHOGONAL OPTIMIZATION ANODIZING COATING OF MAGNESIUM ALLOY

Study on structure and properties of microarc oxidation coating on magnesium alloy in phosphate-potassium hydroxide solution

Study on Structure and Properties of Microarc Oxidation Coating Formed on AM60B Magnesium Alloy

Study on microstructure and corrosion resistance of anodic film of magnesium alloy

Effect of Electrical Parameters on the Microstructure and Corrosion Resistance of Anodized Film of Mg-1Zn-1Gd Alloy Based on Orthogonal Experiment Method

Optimisation of Anodising Electrolyte for Magnesium Alloy AZ31 and Characteristics of Anodic Film

Structure, Composition and Corrosion Resistance of Mg Alloy Anodized Film

Anodization of AZ91 Magnesium Alloy in Alkaline Solution Containing Silicate and Corrosion Properties of Anodized Films

Influence of Anodic Oxidation on the Organizational Structure and Corrosion Resistance of Oxide Film on AZ31B Magnesium Alloy

Optimization of the Bath Composition for Anodizing of Mag-nesium Alloys

EFFECT OF ELECTROLYTE CONSTITUENTS ON PROPERTIES OF ANODIC COATINGS OF MAGNESIUM ALLOYS

Study on the Environmentally Friendly Anodizing of AZ91D Magnesium Alloy

The influence of anodized film on corrosion behavior of magnesium alloys

Optimization of the Bath Composition for Anodizing of Magnesium Alloys

Study on the Micro-arc Oxidation and Surface Treatment of AZ91D Magnesium Alloy

Corrosion resistance enhanced by an atomic layer deposited Al2O3 /micro-arc oxidation coating on magnesium alloy AZ31

Optimization of the Experimental Parameters Affecting the Corrosion Behavior for Mg–Y–Zn–Mn Alloy via Response Surface Methodology

Corrosion behavior of anodized AZ91D magnesium alloy in NaCl aqueous solution

Preparation and performance study of corrosion-resistant surfaces of magnesium alloys

Enhanced Corrosion Protection of Mgo Coatings on Magnesium Alloy Deposited by an Anodic Electrodeposition Process

Corrosion Resistance of Die Casting Magnesium Alloy Treated by Different Surface Treatment Methods