Abstract:This paper takes it as its goal to solve the anoxic problem in the tunneling engineering project of an actual high-altitude mine by conducting numerical simulations and creating conditions for the local oxygen ventilation via a software known as Fluent.To begin with,we have worked out the necessary amounts of the air demand and that of oxygen for the tunneling fronts.Then,we have established a physical model for the tunneling-needed ventilation with oxygen and air transfer near the working face,so as to achieve all the data of the model,such as the section size,the environment pressure,temperature,gravity,and the air density through the actual testing and measurement on the spot.And,afterwards,we have done numerical simulation experiments via Fluent.And,last of all,we have made needed analyses and comparisons of the results gained from the different schemes.All of the above mentioned investigations and examinations have made it possible for us to develop the optimal mode of the oxygen and air pipeline,which has enabled us to bring forward a reasonable as well as rational proposal to provide for the greatest possible oxygen ventilation version.The simulation results indicate that the layout of the oxygen ventilation pipe has a great impact on the availability for the even mixture of the oxygen and air needed,whereas the relative and absolute position choice for the oxygen pipe outlet and the air duct outlet may greatly contribute to the final ventilation results.What is more,the molar concentration of the oxygen to be delivered should be made much greater in the upper end of the tunnel than that in the lower one,otherwise it would create serious waste of cost if their mixture fails to make perfect.Thus,we have made the three design versions of the pipeline arrangement a great success and brought about a favorable proposal for the oxygen and air mixture.Nevertheless,the ideal mixture of oxygen with air had failed at first in the engineering actuality,which calls for great amounts of careful calculation over the rate of oxygen supply before being made optimized.Thus,it can be concluded that the results of the simulated experiments confirm that the oxygen needed should be supplied at a rate of 12.46 m3/min.

STUDY ON TECHNOLOGY OF OXYGEN SUPPLY IN TUNNEL DEVELOPMENT IN HIGH ATTITUDE AREA

Oxygen Concentrating and Application for Railway Tunnel Construction in High Altitude Area and It's Physiological Effects on the Construction Workers

Optimization for diffusion-type oxygen supply nearby working face of railway tunnel in plateau

Technologies of Oxygen Supply for Life Support During the Development of Mineral Resources in High Altitude Areas

Study of Construction Control Technology for Super-long High Altitude Highway Tunnel in Low Pressure and Low Oxygen Environment: Technical Standards for Oxygen Supply, Key Ventilation Technology, Construction Personnel Organization and Construction Equipment Efficiency

Development of New Technologies for Ventilation, Oxygen Supply, Disaster Prevention and Energy Saving for High-altitude Tunnels

On the oxygen-intensifying ventilation technology for plateau mine tunneling via the application of the software Fluent

Study on oxygen concentration distribution of Sejila mount tunnel construction based on fluent

Study on Oxygen Supply Standard for Physical Health of Construction Personnel of High-Altitude Tunnels

The effect of oxygen supply and oxygen distribution on single-head tunnel with different altitudes under mixed ventilation

Study on the Oxygen Enrichment Effect of Individual Oxygen-Supply Device in a Tunnel of Plateau Mine

Study on the Effect of Oxygen Supplementation for Tunneling Workers of Plateau Mine

Numerical analysis and control technology of gas accumulation in a large-scale specially-shaped tunnel passing through coal bearing strata

Increasing Oxygen Mass Fraction in Blind Headings of a Plateau Metal Mine by Oxygen Supply Duct Design: A CFD Modelling Approach

Statistic Analysis Of Oxygen Supplying Status In Qinghai-Tibet Railway Car

Evaluating the Highway Tunnel Construction in Western Sichuan Plateau Considering Vocational Health and Environment

Study and Application of Health Care Measure in Tunnel Construction of Qinghai-Tibet Railway

Optimization of controlled circulating ventilation and oxygen supply scheme for high-altitude mine heading face based on CFD

Study on CO Diffusion Law and Concentration Distribution Function under Ventilation after Blasting in High-Altitude Tunnel

A numerical study on CO migration after blasting in high-altitude tunnel by inclined shaft

Study on oxygen supply system of mine refuge haven