Abstract:This paper takes it as its goal to solve the anoxic problem in the tunneling engineering project of an actual high-altitude mine by conducting numerical simulations and creating conditions for the local oxygen ventilation via a software known as Fluent.To begin with,we have worked out the necessary amounts of the air demand and that of oxygen for the tunneling fronts.Then,we have established a physical model for the tunneling-needed ventilation with oxygen and air transfer near the working face,so as to achieve all the data of the model,such as the section size,the environment pressure,temperature,gravity,and the air density through the actual testing and measurement on the spot.And,afterwards,we have done numerical simulation experiments via Fluent.And,last of all,we have made needed analyses and comparisons of the results gained from the different schemes.All of the above mentioned investigations and examinations have made it possible for us to develop the optimal mode of the oxygen and air pipeline,which has enabled us to bring forward a reasonable as well as rational proposal to provide for the greatest possible oxygen ventilation version.The simulation results indicate that the layout of the oxygen ventilation pipe has a great impact on the availability for the even mixture of the oxygen and air needed,whereas the relative and absolute position choice for the oxygen pipe outlet and the air duct outlet may greatly contribute to the final ventilation results.What is more,the molar concentration of the oxygen to be delivered should be made much greater in the upper end of the tunnel than that in the lower one,otherwise it would create serious waste of cost if their mixture fails to make perfect.Thus,we have made the three design versions of the pipeline arrangement a great success and brought about a favorable proposal for the oxygen and air mixture.Nevertheless,the ideal mixture of oxygen with air had failed at first in the engineering actuality,which calls for great amounts of careful calculation over the rate of oxygen supply before being made optimized.Thus,it can be concluded that the results of the simulated experiments confirm that the oxygen needed should be supplied at a rate of 12.46 m3/min.

Optimization of controlled circulating ventilation and oxygen supply scheme for high-altitude mine heading face based on CFD

The effect of oxygen supply and oxygen distribution on single-head tunnel with different altitudes under mixed ventilation

Increasing Oxygen Mass Fraction in Blind Headings of a Plateau Metal Mine by Oxygen Supply Duct Design: A CFD Modelling Approach

Novel oxygen-enrichment method using annular air curtain for single-head roadway of plateau mine

Optimization for diffusion-type oxygen supply nearby working face of railway tunnel in plateau

Parameters optimization of combined ventilation in an excavation roadway of high-altitude mine

Technologies of Oxygen Supply for Life Support During the Development of Mineral Resources in High Altitude Areas

A numerical study on CO migration after blasting in high-altitude tunnel by inclined shaft

Relative Importance of Certain Factors Affecting Air Exchange in a High-Altitude Single-Heading Tunnels Based on the Numerical Simulation Method

The Influence of Ventilation Arrangement on the Mechanism of Dust Distribution in Woxi Pithead

On the oxygen-intensifying ventilation technology for plateau mine tunneling via the application of the software Fluent

Study on the Oxygen Enrichment Effect of Individual Oxygen-Supply Device in a Tunnel of Plateau Mine

Minimizing DPM Pollution in an Underground Mine by Optimizing Auxiliary Ventilation Systems Using CFD

Cfd Ventilation Simulation Of Deep Mine With High Temperature Based On Human Thermal Comfort

Dust concentration distribution and analysis of influencing factors in the heading face of Shangwan coal mine

Study on the Effect of Oxygen Supplementation for Tunneling Workers of Plateau Mine

Optimization Research of Hydraulic Support in Fully Mechanized Caving Face

CFD Simulation of Oxidation Zones Distribution in Goal of Fully-Mechanized Caving Face

Numerical simulation investigation on optimal dust-exhausting airflow volume in fully mechanized caving face of high-gas coal mine

The Optimum Arrangement of Working Face Ventilation System for Coal Mine

Optimization of wind-and-water coordinated dust reduction device for coal mine return airway based on CFD technology