Study on screening and evaluation process of inhibitors for carbon dioxide flooding wells

Haiyan Zhao,Yanyan Ding,Shanzhi Shi,Lele Cai,Baojun Dong,Dezhi Zeng

DOI: https://doi.org/10.3969/j.issn.1007-3426.2018.01.016

2018-01-01

Abstract:Adding inhibitors is the main method to control wellbore corrosion of oil and gas fields, and the key of prevent wellbore corrosion is how to screen suitable inhibitors.The screening and evaluating of inhibitors for CO2driving well of an oilfield were taken as an example in this paper,and the temperature of wellbore was 60 -120 ℃ and CO2partial pressure was 0.2 MPa.Firstly,the physical and chemical properties of the inhibitors were evaluated by compatibility experiment. Secondly,the corrosion inhibitors with inhibition efficiency greater than 90% were screened out by electrochemical method.Finally,the working conditions was simulated by using HTHP autoclave (the temperature were 90 ℃ and 120 ℃,and CO2partial pressure was 0.2 MPa),then the inhibitors were evaluated by experiment of corrosion weight loss and by SEM analysis for the antiseptic effect. Experimental results show that there are four in seven inhibitors have the good compatibility of inhibitors and produced liquid, w hen the inhibitor concentration is 200 mg/L, the inhibition efficiencies of two inhibitors are more than 90% at atmospheric pressure. Under the filler concentration of 1 mol/L and simulating the actual production conditions,the optimum inhibitor can reduce the corrosion rate of D rod and N80 steel within 0.076 mm/a up to the corrosion control index of oilfield.The study shows that the inhibitors which are suitable for CO 2driving wellbore can be screened and evaluated rapidly by the compatibility experiment,the screening of electrochemical test, and the verification of simulating wording conditions by using HTHP autoclave.