Abstract:In hot and humid climates, asphalt pavements frequently encounter environmental factors such as elevated temperatures and rainfall, leading to rutting deformations and potholes, which can affect pavement performance. The primary objective of this study was to enhance the hydrothermal characteristics of asphalt mixtures through an investigation into the impact of anhydrous calcium sulfate whisker (ACSW) and polyester fiber (PF) on the hydrothermal properties of asphalt mixtures. In this paper, a central composite concatenation design (CCC) was employed to determine the optimal combination of ACSW and PF contents, as well as the asphalt aggregate ratio (AAR). Each influencing factor was assigned three levels for analysis. The evaluation indexes included dynamic stability, retained Marshall stability, and tensile strength ratio. Using the analysis methods of variance and gray correlation degree analysis, the hydrothermal properties of the asphalt mixture were examined in relation to the contents of ACSW, PF, and AAR based on the CCC results. Consequently, the optimal mix design parameters for composite modified asphalt mixture incorporating ACSW and PF were determined. The results indicated that the asphalt mixtures with hydrothermal qualities exhibited optimal performance in terms of 4.1% ARR, 11.84% ACSW, and 0.4% PF. The interaction between AAR and ACSW content had a greater effect on the dynamic stability and tensile strength ratio of the asphalt mixture, whereas the incorporation of ACSW and PF had a greater effect on the retained Marshall stability of the asphalt mixture. Among the three contributing factors, AAR exhibited the strongest relationship with the hydrothermal characteristics of the asphalt mixture, followed by the ACSW content; the correlation of PF content was the lowest. Therefore, to enhance the hydrothermal characteristics of the asphalt mixture, it is important to conduct a full evaluation of the constituents of ACSW and PF, along with the AAR in hot-humid regions.

EFFECT OF COMPOSITION AND STRUCTURE ON PERFORMANCE OF 30# HARD ASPHALT

Comparative evaluation of the aging performance of hard asphalts using physical chemical relationships

Research on Preparation and High Temperature Behavior of High-Modulus Asphalt

Preparation and Evaluation of 30# Hard Grade Asphalt

Research on low temperature rheological behavior of aging resistant bitumen and mixture

Characterization of Hard-Grade Asphalt Using Entropy Analysis

Investigation of the Microcharacteristics of Asphalt Mastics under Dry–Wet and Freeze–Thaw Cycles in a Coastal Salt Environment

Study on Aging Mechanism and High-Temperature Rheological Properties of Low-Grade Hard Asphalt

Preparation and evaluation of hard asphalts by different process

Comparison of the Physical Properties and Chemical Structures of the Tahe Asphalt Before and after Oxidative Aging

Solvent Deasphalting of Saudi Residue to Produce 30(#) Hard Asphalt

A Study on Effect of Organic Compound Addition Agent on Properties of Asphalt

The Multi-Objective Optimization Design and Hydrothermal Performance Evaluation of Anhydrous Calcium Sulfate Whisker and Polyester Fiber Compound Modified Asphalt Mixture in Hot-Humid Areas

Experimental and molecular dynamics simulation of hard asphalt microstructure

An Evaluation of Several Kinds of Asphalt Mixtures' Low-Temperature Performance Based on TSRST

A Study on Antiaging Performances of Two Paving Asphalts

Influence of Temperature on the Mechanical Response of Asphalt Mixtures Using Microstructural Analysis and Finite-Element Simulations

Analysis of the Microcharacteristics of Different Kinds of Asphalt Based on Different Aging Conditions

Influence of Thermo-Oxidative Aging on the Properties of SBS-Modified Asphalt Binders

Rheological and Aging Properties of Nano-Clay/SBS Composite-Modified Asphalt

Property Characterization of Anti-Aging Additives and Modified Asphalt Based on Long-Term Aging Behavior