Abstract:The asphalt mixture designed with the Marshall mix design method has stable quality and convenient technical management, but the design range of the asphalt-aggregate ratio is small and difficult to adjust, and is therefore difficult to adapt to the design of functional pavement materials with different requirements. In order to solve these problems, the asphalt-filler volume equivalent substitution method (the volume equivalent substitution method) has been proposed. Based on the optimum asphalt-aggregate ratio of the Marshall method, the asphalt-aggregate ratio in the mixture is increased by the equal volume substitution of asphalt and filler. The increase in the asphalt volume is equal to the decrease in the filler volume, and vice versa. With the condition of constant aggregate gradation, the modified asphalt of asphalt mixtures with filler contents of 6.0%, 4.5%, 3.0%, 1.5%, and 0% is designed based on the AC-13 gradation. Based on this, a high-temperature stability test, a low-temperature crack resistance test, a four-point bending fatigue test, and other tests are carried out for the asphalt mixtures. The results show that the dynamic stability of each mix proportion designed with the volume equivalent substitution method is 4924 times/mm even under the most unfavorable conditions (the filler dose is 0%). The maximum bending tensile strain of the specimen with a 0% filler dosage can reach 9667 μ, which is more than twice that of the specimen with a 6% filler dosage. The fatigue test shows that increasing the asphalt content in the mixture is beneficial for improving fatigue durability. The research results show that the material designed by the volume equivalent substitution method has excellent road performance in each proportion. This paper provides a method for the flexible adjustment of the asphalt-aggregate ratio and the asphalt mixture comprehensive road performance. Using this method, the optimum asphalt-aggregate ratio needs to be determined comprehensively according to the stress characteristics and functional requirements of the pavement and the pavement performance index of the mixture, and further research is still needed.

Preparation and Evaluation of 30# Hard Grade Asphalt

Preparation and evaluation of hard asphalts by different process

Research on Preparation and High Temperature Behavior of High-Modulus Asphalt

PREPARATION OF HEAVY PAVING ASPHALT BY BLENDING–OXIDIZING ANSHAN VACUUM RESIDUE AND THE EVALUATION OF ITS PAVING PERFORMANCE

EFFECT OF COMPOSITION AND STRUCTURE ON PERFORMANCE OF 30# HARD ASPHALT

Research on Blending of New National Standard 70# Heavy Traffic Road Asphalt

Characterization of Hard-Grade Asphalt Using Entropy Analysis

Physical Properties of Graphene-Oxide Modified Asphalt and Performance Analysis of Its Mixtures Using Response Surface Methodology

STUDY ON THE PREPARATION OF CRUMB RUBBER/SBS COMPOSITE MODIFIED ASPHALT

Study on Aging Mechanism and High-Temperature Rheological Properties of Low-Grade Hard Asphalt

Performance Evaluation of Hard-Grade Paving Asphalt Mixture

Feasibility Evaluation of Preparing Asphalt Mixture with Low-Grade Aggregate, Rubber Asphalt and Desulphurization Gypsum Residues

Dynamic Viscoelastic Property of Hard-Grade Asphalt Mixture

Gradation Design and Parameter Determination of Warm-Mix-Agent-Modified Asphalt Mixture

Evaluation of Compaction Characteristics of Asphalt Mixture under Different Compaction Effects

Principle analysis of the mix design and performance evaluation of the asphalt-filler volume equivalent substitution method

Construction Asphalt Prepared by Chemical Treatment of Deoiled Asphalt

Research on High-Temperature Evaluation Indexes and Performance of Qingchuan Rock-SBS Composite Modified Asphalt

Evaluation of cooling effect and road performance of warm mixed high viscosity porous asphalt mixture

IMPROVING ROAD ASPHALT PERFORMANCE BY CO-DISTILLATION OF TAHE HEAVY CRUDE OIL AND COKER GAS OIL

Performance Evaluation of Hot In-Place Recycled Asphalt Mixtures