Abstract:An understanding of the support effect is fundamental for guiding the rational design of heterogeneous catalysts. Herein, the role of pore structure on metal dispersion and catalytic performance was comprehensively investigated using Ni/Al2O3 catalysts. Three different Al2O3 supports, including Al2O3 microspheres prepared in microchannels and two commercially available Al2O3 supports named Sample 1 and Sample 2, were used and the Ni/Al2O3 catalysts were prepared by wetness impregnation method. X-ray diffraction, transmission electron microscopy, H2 temperature-programmed reduction, X-ray photoelectron spectroscopy, N2 adsorption-desorption, and H2 pulse chemisorption analyses combined with a sintering kinetic model were used to investigate the effect of the support pore structure. The narrow pore size distribution (3-15 nm) of Al2O3 microspheres and Sample 1 led to a uniform NiO dispersion for the calcined catalysts. Moreover, the high specific surface area (291 m2/g) and large pore volume (1.0 mL/g) of the Al2O3 microspheres were beneficial for the deposition of NiO particles inside mesopore to obtain a stronger metal-support interaction. Owing to the smaller NiO nanoparticles and stronger metal-support interaction, the reduced Ni/Al2O3 microspheres exhibited an average Ni particle size of 10.2 nm under 36 wt% nickel loading, whereas the average Ni particle size loaded on Sample 1 and Sample 2 were 12.6 nm and 13.2 nm, respectively. The optimized CO2 conversion of 87.0% at 300 degrees C under atmospheric pressure was attributed to the large pore volume and uniform Ni dispersion of Ni/ Al2O3 microsphere catalysts while the same value for Sample 1 and Sample 2 catalysts was 81.5% and 55.0%, respectively. This work provides valuable guidelines for designing effective CO2 methanation support and proves the potential application of Al2O3 microspheres for CO2 methanation.

Preparation of macroporousα-Al2O3 support and its application in preparing catalyst for CO coupling reaction

Effect of support texture properties on Ni-Fe/γ-Al_2O_3 catalyst structure and catalytic performance for CO methanation

Effect of γ-Al2O3 Pore Structure on Activity of Supported Pd Catalysts in C9 Petroleum Resin Hydrogenation

Effects of Pd distribution in macro-porousα-Al2O3 support on CO coupling reaction

High-Performance, Low Pd-Loading Microfibrous-Structured Al-Fiber@Ns-Alooh@Pd Catalyst for Co Coupling to Dimethyl Oxalate

Mechanochemical synthesis of a high-surface-area Pd/α-Al<sub>2</sub>O<sub>3</sub> catalyst for CO oxidative coupling to dimethyl oxalate reaction

Influence of Alpha-Al2o3 Properties on Co Catalytic Coupling Reaction over Pd Catalyst

Highly Effective Pd/MgO/γ-Al 2 O 3 Catalysts for CO Oxidative Coupling to Dimethyl Oxalate: The Effect of MgO Coating on γ-Al 2 O 3

Efficient CO Oxidative Coupling to Dimethyl Oxalate over the Pd/Al2O3 Nanocatalyst with the Assistance of Co Doping

Effect of Pore Structure on Ni/Al2O3 Microsphere Catalysts for Enhanced CO2 Methanation

Study on Pd/Alpha-Al2o3 Catalyst for Vapor-Phase Coupling Reaction of Co with Ch3ono to (Ch3ooc)(2)

Preparation and Fischer-Tropsch Synthesis Performance of Hierarchical Co/Al-SiO2 Catalyst

Effect of Support Α-Al2o3 on the Performance of Palladium Catalyst in Oxalate Diester Preparation

Highly active Pd-Fe/α-Al2O3 catalyst with the bayberry tannin as chelating promoter for CO oxidative coupling to diethyl oxalate

Pretreatment of Alumina and Its Influence on the Properties of Co/Alumina Catalysts for Fischer-Tropsch Synthesis

Effects of Precursors on Preparation of Pd/α-alumina Catalyst for Synthesis of Dimethyl Oxalate

Preparation and Catalytic Performances of a Three-Dimensionally Ordered Macroporous MgFe0.1Al1.9O4 Catalyst for Ethylbenzene Oxydehydrogenation with CO2

Mechanism of CO Coupling to Dimethyl Oxalate over Pd/α-Al_2O_3

Role of PdCx Species in Pd@PdCx/AlOOH/Al-fiber Catalyst for the CO Oxidative Coupling to Dimethyl Oxalate

Preparation of Ag/ Al2O3 Selective Catalytic Reduction Monolithic Catalyst

In situ infrared studies of the catalytical synthesis of dimethyl oxalate from CO and CH 3ONO over AL 2O 3 supported Pd-Cu alloy catalysts