Finite Element Analysis on Strength of Lifting Ropes of Double Horse Head Beam Pumping Unit

张宏志,盛选禹

DOI: https://doi.org/10.3969/j.issn.1001-2206.2008.05.008

2008-01-01

Abstract:Because the lifting rope life of rear horse head of a double horse head beam pumping unit is relatively short in field application, a three dimensional model of the rear horse and lifting ropes was constructed to solve the problem. The stresses and displacements of the lifting ropes were analyzed by finite element software ABAQUS. The influences of friction coefficients between the lifting ropes and rear horse head as well as the length difference among the lifting ropes were considered. The analysis shows that the lower friction coefficient, the more uniform stress distribution; when there is length difference among the lifting ropes, the stress of short lifting rope is obviously higher. Based on the computational results, it is concluded that the higher friction coefficient, the shorter life of lifting rope; the life of short lifting rope is shorter than that of long ones. Grease lubricant should be added on the contact surface between the lifting ropes and the rear horse head, and solid lubricant should be put into the grease to decrease the friction coefficient. Before the lifting rope is installed, pre-pull treatment is useful for it,that can generate preload stress and preload strain in the lifting rope.