Abstract:The Ni-50Cr coatings are prepared under different plasma spray conditions which are arranged according to the orthogonal experimental design method using three typical parameters of plasma arc current, Ar flow and spray distance in order to obtain the quantitative regression correlations between spray parameter and coating mechanical properties, and examine the relationship between the mechanical properties and microstructure features. The mechanical properties of sprayed Ni-Cr coatings are characterized by hardness, abrasive wear weight loss and erosion rates. The microstructure of the coatings is examined by optical and electron scanning microscopes. The porosity in the coating is quantitatively estimated from by the increase in Cr content of the coating after the impregnation of Cr2O3 into pores of the coating. The effects of spray parameters on the mechanical properties of the coating are discussed according to regression formulas systematically.The results evidently show that three typical parameters have significant inter-effects on the microstructure and properties of the Ni-Cr coatings. There are evident correlations among the hardness and abrasive wear resistance, and porosity for plasma sprayed Ni-Cr coatings. With the decrease in the porosity of the coating, the hardness and abrasive wear resistance of the Ni-Cr coating are increased. On the other hand, there are no correlations between erosion resistance and hardness, and porosity as well. It has been found that the abrasive wear occurs mainly by micro-cutting of abrasives while the erosion occurs mainly by the successive separation of flattened particles exposed to the surface which are subjected to the direct impact of erosive particles. Therefore, the abrasive wear resistance is primarily dependent on the density and hardness of the coating, while the erosion wear is mainly dependent on the condition of the cohesion between flattened particles. The results also revealed that the deposition of partially melted particles into the coating deteriorates the erosion resistance of the coating, especially at low impact angle.

Optimization of Plasma Spray Parameters for Ni-Cr-B-Si/Al2O3-TiO2 Coating

Optimization of Atmospheric Plasma Spray Process Parameters by Orthogonal Experimental Design for Al2O3-13wt.％TiO2 Coating

The Effect of Plasma Spray Parameters on the Quality of Al-Ni Coatings

Research on Composition Controlling and Microstructure Performance of Plasma Spraying Al2O3-Cr2O3/NiCoCrAIYTa Coating

Optimization of Supersonic Plasma Spraying Parameters Based on Coating Porosity

Process Optimization of laser remelting plasma -sprayed NiCr-Cr3 C2 coatings

Optimization of Thermal Spray Parameters of NiAl/Cr2C3 Coating by Taguchi Method

Microstructure and Property of Nanostructured Al2O3-13 Wt% TiO2 Coatings Prepared by Plasma Spraying

Parameter Optimization of Dry-Ice Blasting During Plasma Spraying Process by Characterizing CoNiCrAlY Coatings

Relationships Between Microstructure, Mechanical Properties of Plasma-sprayed Ni-50Cr Coatings and Spray Parameters.

Effect of Spraying Parameters on the Microstructure and Mechanical Properties of Micro-Plasma Sprayed Alumina-Titania Coatings

The dependency of microstructure and properties of nanostructured coatings on plasma spray conditions

Optimizing of Hardness, Microstructure and Adhesive Strength of Plasma-Sprayed FeSiAl Coatings Using Orthogonal Analysis

Mechanical structure and property analysis of Al_2O_3-13%TiO_2 nano-structured plasma sprayed coatings

Process Optimization of Supersonic Plasma Transfer Arc Spraying Aluminum Coating by Response Surface Method

Effects of Spray Parameters on the Microstructure and Property of Al2O3 Coatings Sprayed by a Low Power Plasma Torch with a Novel Hollow Cathode

Optimization of the Process Parameters of Atmospheric Plasma Spraying Cobalt Ferrite Coatings by Orthogonal Experimental Design

Effect of Spraying Power on the Microstructure and Mechanical Properties of Supersonic Plasma-Sprayed Ni-based Alloy Coatings

Composition optimization of Al-Ni-Ti alloys based on glass-forming ability and preparation of amorphous coating with good wear resistance by plasma spray

Microstructural and Porosity Variations in the Plasma-Sprayed Ni-Alloy Coatings Prepared at Different Spraying Powers

Porosity and surface roughness simulation of nickel-aluminum coating in plasma spray forming