Abstract:The Ni-50Cr coatings are prepared under different plasma spray conditions which are arranged according to the orthogonal experimental design method using three typical parameters of plasma arc current, Ar flow and spray distance in order to obtain the quantitative regression correlations between spray parameter and coating mechanical properties, and examine the relationship between the mechanical properties and microstructure features. The mechanical properties of sprayed Ni-Cr coatings are characterized by hardness, abrasive wear weight loss and erosion rates. The microstructure of the coatings is examined by optical and electron scanning microscopes. The porosity in the coating is quantitatively estimated from by the increase in Cr content of the coating after the impregnation of Cr2O3 into pores of the coating. The effects of spray parameters on the mechanical properties of the coating are discussed according to regression formulas systematically.The results evidently show that three typical parameters have significant inter-effects on the microstructure and properties of the Ni-Cr coatings. There are evident correlations among the hardness and abrasive wear resistance, and porosity for plasma sprayed Ni-Cr coatings. With the decrease in the porosity of the coating, the hardness and abrasive wear resistance of the Ni-Cr coating are increased. On the other hand, there are no correlations between erosion resistance and hardness, and porosity as well. It has been found that the abrasive wear occurs mainly by micro-cutting of abrasives while the erosion occurs mainly by the successive separation of flattened particles exposed to the surface which are subjected to the direct impact of erosive particles. Therefore, the abrasive wear resistance is primarily dependent on the density and hardness of the coating, while the erosion wear is mainly dependent on the condition of the cohesion between flattened particles. The results also revealed that the deposition of partially melted particles into the coating deteriorates the erosion resistance of the coating, especially at low impact angle.

Parameter Optimization of Dry-Ice Blasting During Plasma Spraying Process by Characterizing CoNiCrAlY Coatings

Effect of Dry-Ice Blasting on the Microstructure and Properties of Plasma-Sprayed CoNiCrAlY Coating

Improvement in the Properties of Plasma-Sprayed Metallic, Alloy and Ceramic Coatings Using Dry-Ice Blasting

Study on the Mechanism of Adhesion Improvement Using Dry-Ice Blasting for Plasma-Sprayed Al2O3 Coatings

Microstructure and Properties of Cr2O3 Coating Deposited by Plasma Spraying and Dry-Ice Blasting

Modelling of dry ice blasting and its application in thermal spray

Combination Effect of Dry-Ice Blasting and Substrate Preheating on Plasma-Sprayed CoNiCrAlY Splats

Effect of Dry-Ice Blasting on Structure and Magnetic Properties of Plasma-Sprayed Fe-40al Coating from Nanostructured Powders

Deposition of NiCrBSi coatings by atmospheric plasma spraying and dry-ice blasting: Microstructure and wear resistance

Oxidation Control of Atmospheric Plasma Sprayed FeAl Intermetallic Coatings Using Dry-Ice Blasting

Optimization of Plasma Spray Parameters for Ni-Cr-B-Si/Al2O3-TiO2 Coating

The Effect of Plasma Spray Parameters on the Quality of Al-Ni Coatings

Effects of Dry-Ice Blasting on Plasma-Sprayed Thermal Barrier Coatings

Effects of gas property on quality of NiCoCrAlY coating by cold gas dynamic spraying

The Microstructure and Deposition Behavior of NiCr Alloy Coatings Using Laminar Plasma Spraying

Effect of dry-ice blasting on the deposition behavior of molybdenum particles onto aluminum and stainless steel substrates using plasma spraying: From single splat to coating

Suppression effect of decarburization by dry-ice blasting on plasma-sprayed steel coatings: Structure, wear performance and magnetic properties

Nanoparticles Modeling in Axially Injection Suspension Plasma Spray of Zirconia and Alumina Ceramics

Preparation of Aluminum Coatings by Atmospheric Plasma Spraying and Dry-Ice Blasting and Their Corrosion Behavior

Relationships Between Microstructure, Mechanical Properties of Plasma-sprayed Ni-50Cr Coatings and Spray Parameters.

Effects of Spray Parameters on the Microstructure and Property of Al2O3 Coatings Sprayed by a Low Power Plasma Torch with a Novel Hollow Cathode