Abstract:Increasing demand for energy and rising concerns over global warming has urged the use of renewable energy sources to carry a sustainable development of the world. Bio mass is a renewable energy which has become an important fuel to produce thermal energy or electricity. It is an eco-friendly source of energy as it reduces carbon dioxide emissions. Combustion of solid biomass is a complex phenomenon due to its large varieties and physical structures. Among various systems, fixed bed combustion is the most commonly used technique for thermal conversion of solid biomass. But inadequate knowledge on complex solid conversion processes has limited the development of such combustion system. Numerical modelling of this combustion system has some advantages over experimental analysis. Many important system parameters (e.g. temperature, density, solid fraction) can be estimated inside the entire domain under different working conditions. In this work, a complete numerical model is used for solid conversion processes of biomass combustion in a fixed bed furnace. The combustion system is divided in to solid and gas phase. This model includes several sub models to characterize the solid phase of the combustion with several variables. User defined subroutines are used to introduce solid phase variables in commercial CFD code. Gas phase of combustion is resolved using built-in module of CFD code. Heat transfer model is modified to predict the temperature of solid and gas phases with special radiation heat transfer solution for considering the high absorptivity of the medium. Considering all solid conversion processes the solid phase variables are evaluated. Results obtained are discussed with reference from an experimental burner.

Numerical Simulation of Cyclone Combusition of Biomass Micron Fuel

Numerical Simulation on Combustion Characteristics of Biofuels with Different Calorific Values

Experimental Study on Combustion Characteristic of Biomass Micron Fuel

Modelling the Combustion of Thermally Thick Biomass Particles

Numerical Simulation of Multifuel Combustion in A 200 Mw Tangentially Fired Utility Boiler

Numerical Modelling of the Co-Firing of Pulverised Coal and Straw in A 300 Mwe Tangentially Fired Boiler

Multi-Scale Simulation of Biomass Gasification in Fluidized Beds

Numerical simulation of gasification characteristics in a circulating fluidized bed biomass gasifiers

NUMERICAL SIMULATION OF CYCLONE HUSK AIR GASIFICATION

Modelling Wooden Biomass Combustion in an Vertical Experimental Furnace

Combustion Modeling Of Cfb Boiler Furnace Based On An Euler-Euler Approach

Combustion Model for a CFB Boiler with Consideration of Post-Combustion in the Cyclone

Simulation of Gas Combustion and Two-Phase Flows in a Cyclone Furnace

Numerical Simulation On Fluid Flow And Combustion In A Subcritical Pressure Boiler With Various Hybrid Coal

Numerical modelling of biomass combustion: Solid conversion processes in a fixed bed furnace

CFD simulation study of a biomass pellet-fuelled boiler

B203 NUMERICAL INVESTIGATION OF FUEL CHARACTERISTICS AND CONCENTRATION ON PULVERIZED COAL COMBUSTION(Combustion-4)

Three-dimensional Modeling Study of the Oxy-Fuel Co-Firing of Coal and Biomass in a Bubbling Fluidized Bed

Simulation of Coal and Biomass Cofiring with Different Particle Density and Diameter in Bubbling Fluidized Bed under O2/CO2 Atmospheres

Numerical Simulation of the Co-Firing of Pulverized Coal and Eucalyptus Wood in a 1000mwth Opposed Wall-Fired Boiler

An Experimental Study on Air Gasification of Biomass Micron Fuel (BMF) in a Cyclone Gasifier