Abstract:Gasification of biomass waste is considered as a green and sustainable solution to reduce waste volumes and recover energy by producing syngas. In this study, both experiment and simulation have been conducted to understand the various physical and chemical effects in a fixed bed downdraft gasifier and to provide researchers with a tool to overcome the need to conduct cost intensive experiments for predicting and optimizing energy efficiencies. A combined transient single particle and fuel-bed model is developed to describe the entire packed bed in the flow direction of primary air and intraparticle phenomena. The reactor is discretized and in each cell one representative particle is chosen to be modelled as shrinking sphere. The reactor was divided into three regions due to the difference of air velocity in each region: natural convection region, mixed convection region and forced convection region. Sensitivity analysis has been conducted to determine the boundary location of each region. The presented model considers drying, pyrolysis, homogeneous gas reactions, and heterogeneous combustion/gasification reactions. In the gas phase eight species (O2, N2, CO, CO2, H2, H2O, CH4 and tar) are considered. The solid phase is biomass waste, in which all the components obtained from approximate analysis (moisture, volatiles, fixed carbon and ash) and ultimate analysis (C, H, O, N) are treated as dependent variables of time and space. This model can predict production rate and quality of both synthetic gas and produced char from gasifier reactor. The optimized biomass properties, equivalence ratio and air inlet location for maximum energy efficiency can also be obtained from this model. Experiments have been conducted to investigate the effects of different parameters on gasification performance, such as biomass moisture content, particle size and shape, equivalence ratio, etc. The experimental results are also used to validate against simulation results and the deviation between the numerical and experimental results obtained in this study is lower than 10%.

Numerical modelling of biomass combustion: Solid conversion processes in a fixed bed furnace

CFD Modelling and Optimization of Solid Waste Combustion in a 1 MW Fixed Bed Combustion Chamber

Multi-Scale Simulation of Biomass Gasification in Fluidized Beds

CFD Modelling of the Co-Gasification of Biomass and Coal Particles in Fluidised Beds

Modelling Wooden Biomass Combustion in an Vertical Experimental Furnace

A Mathematical Model of Biomass Combustion Physical and Chemical Processes

Numerical simulation of a chemical looping combustion of biomass: Hydrodynamic investigation

Modelling the Combustion of Thermally Thick Biomass Particles

Numerical Simulation of Cyclone Combusition of Biomass Micron Fuel

Numerical Investigation of Biomass Pyrolysis Performance in a Fluidized-Bed Reactor by a TFM-DEM Hybrid Model

Numerical Modeling of Fixed-Bed Cocombustion Processes Through the Multiple Thermally Thick Particle Model.

CFD modeling of biomass combustion and gasification in fluidized bed reactors using a distribution kernel method

An improved detailed chemical mechanism for numerical simulations of the gas-phase of biomass combustion

Advanced Modeling Approaches for CFD Simulations of Coal Combustion and Gasification

Numerical and Experimental Analysis of Heat Transfer for Solid Fuels Combustion in Fixed Bed Conditions

A Review of Biomass Thermal Analysis, Kinetics and Product Distribution for Combustion Modeling: From the Micro to Macro Perspective

A Review of Numerical Modeling and Experimental Analysis of Combustion in Moving Grate Biomass Combustors

Modeling Biomass Gasification in Circulating Fluidized Beds

CFD simulation study of a biomass pellet-fuelled boiler

Combustion Modeling Of Cfb Boiler Furnace Based On An Euler-Euler Approach

Biomass Gasification in a Fixed Bed Downdraft Gasifier: Experimental Study and Comprehensive Reactor and Particle Modelling